System Fuse (Input/Output Cabinet)
The Input/Output Cabinet contains the control power fuses for power that is coming into the Input/Output Cabinet. The Input/Output Cabinet contains fuses for the Maintenance Bypass Option and the External Source Sync Option. The fuse blocks are located on the left panel of the Input/Output Cabinet.
Show/hide table
Illustration 1 | g01273901 |
Input/Output Cabinet - Left Panel (11) GSM Breaker (1x GSM Option) (12) GSM Breaker (2x GSM Option) (13) Fuse Block F91-F93 (14) Fuse Block (Maintenance Bypass Option) F55,F56 (15) Fuse Block F11,F12 F17-F19 (16) Fuse Block F1-F3 F7-F10 (17) Terminal Block (External Source Sync Option) (18) ESS PWA (External Source Sync Option) (19) Fuse Block (External Source Sync Option) F64-F66 |
Refer to Systems Operation, Testing and Adjusting, RENR7654, "General Information (Input/Output Cabinet)" for the location of the left panel in the cabinet. Refer to Illustration 1 for the locations of the fuses on the left panel. Refer to Illustration 2 for specific fuse locations.
Show/hide table
Fuse     | Amperes     | Protects     |
---|---|---|
F1     | 1     | High Voltage Interface Board in the Controls Cabinet at connector J5     |
F2     | 1     | High Voltage Interface Board in the Controls Cabinet at connector J5     |
F3     | 1     | High Voltage Interface Board in the Controls Cabinet at connector J5     |
F7     | 2.5     | T1 Transformer in the Controls Cabinet     |
F8     | 2.5     | T1 Transformer in the Controls Cabinet     |
F9     | 2.5     | T2 Transformer in the Controls Cabinet     |
F10     | 2.5     | T2 Transformer in the Controls Cabinet     |
F11     | 7     | T5 Transformer in the Controls Cabinet     |
F12     | 7     | T5 Transformer in the Controls Cabinet     |
F17     | 30     | R17 and R18 resistors on the input (K1) side of the Input/Output Cabinet and the pre-charge power supply in the Static Switch cabinet     |
F18     | 30     | R17 and R18 resistors on the input (K1) side of the Input/Output Cabinet and the pre-charge power supply in the Static Switch cabinet     |
F19     | 30     | R17 and R18 resistors on the input (K1) side of the Input/Output Cabinet and the pre-charge power supply in the Static Switch cabinet     |
F55     | 4     | T10 Transformer in the Maintenance Bypass Cabinet (1)     |
F56     | 4     | T10 Transformer in the Maintenance Bypass Cabinet (1)     |
F64     | 1     | External Source Sync Board in the Input/Output cabinet (2)     |
F65     | 1     | External Source Sync Board in the Input/Output cabinet (2)     |
F66     | 1     | External Source Sync Board in the Input/Output Cabinet (2)     |
F91     | 1     | R19 and R20 resistors on the output (K5) side of the Input/Output Cabinet     |
F92     | 1     | R19 and R20 resistors on the output (K5) side of the Input/Output Cabinet     |
F93     | 1     | R19 and R20 resistors on the output (K5) side of the Input/Output Cabinet     |
Show/hide table
( 1 ) | The T10 Transformer is not present if the Maintenance Bypass Option is not installed. |
( 2 ) | The External Source Sync Board is not present if the External Source Sync Option is not installed. |
Show/hide table
Illustration 2 | g01274060 |
Caterpillar Information System:
UPS 1000S/ UPS 1200S Uninterruptible Power Supplys Internal Component Preremoval Steps (Input/Output Cabinet)
UPS 120, UPS 150, UPS 250, UPS 300, UPS 301, UPS 500, UPS 600, UPS 750 and UPS 900 Uninterruptible Power Supplies Personal Computer to UPS Connection
UPS 120, UPS 150, UPS 250, UPS 300, UPS 301, UPS 500, UPS 600, UPS 750 and UPS 900 Uninterruptible Power Supplies Firmware - Update
CX35 On-Highway Transmission Lubricant Viscosities
UPS 120, UPS 150, UPS 250, UPS 300, UPS 301, UPS 500, UPS 600, UPS 750 and UPS 900 Uninterruptible Power Supplies Log File - Retrieve
797B Off-Highway Truck Steering System Steering Accumulator - Test and Charge
C4.4 Industrial Engine V-Belt - Test
UPS 1000S/ UPS 1200S Uninterruptible Power Supplys General Information (Input/Output Cabinet)
UPS 120, UPS 150, UPS 250, UPS 300, UPS 301, UPS 500, UPS 600, UPS 750 and UPS 900 Uninterruptible Power Supplies Modem - Configure
C4.4 Industrial Engine Crankshaft Pulley - Check
C4.4 Industrial Engine Alternator - Test
2006/05/22 Revised Product Support Update {0374}
797F Off-Highway Truck Steering System Steering Accumulator
UPS 1000S/ UPS 1200S Uninterruptible Power Supplys Reset Pushbutton
C11 and C13 Petroleum Engines Fuel System Secondary Filter - Replace
TH48-E70 Petroleum Transmission Specifications
UPS 1000S/ UPS 1200S Uninterruptible Power Supplys Breaker Bell Alarm Supervisor Board
C15 and C18 Petroleum Generator Sets Fuel System Primary Filter/Water Separator - Drain
UPS 1000S/ UPS 1200S Uninterruptible Power Supplys Cable Landing (Input/Output Cabinet)
UPS 1000S/ UPS 1200S Uninterruptible Power Supplys Circuit Breaker (K1, K5)
C18 Petroleum Generator Sets Cooling System Coolant (ELC) - Change
CD44B and CD54B Vibratory Asphalt Compactors High Pressure Fuel Lines
UPS 1000S/ UPS 1200S Uninterruptible Power Supplys MOV Circuit Breaker (K10)
UPS 120, UPS 150, UPS 250, UPS 300, UPS 301, UPS 500, UPS 600, UPS 750 and UPS 900 Uninterruptible Power Supplies Service Tools