Atmospheric Pressure Sensor - Remove and Install
拆卸步骤
- 断开线束组件 (1) ,然后拆下大气压力传感器 (2) 。
Show/hide table
图 1 | g02142868 |
压力传感器靠近发动机进气歧管。 |
安装步骤
- 按照相反顺序安装压力传感器 (1) 。
注: 锁片指向应远离发动机。
- 将传感器 (1) 拧紧至扭矩为 10 ± 2 N·m (89 ± 18 lb in)。
注: 不要使用传感器的塑料部分预紧传感器。 使用传感器的金属六角部分预紧传感器。 如果使用传感器的塑料部分预紧传感器,则可能会损坏传感器。
Caterpillar Information System:
IT28G Integrated Toolcarrier and 924G, 924GZ and 928G Wheel Loaders MID 081 - CID 0041 - FMI 04
IT28G Integrated Toolcarrier and 924G, 924GZ and 928G Wheel Loaders MID 081 - CID 0041 - FMI 03
914G Compact Wheel Loader and IT14G Integrated Toolcarrier Plate Locations and Film Locations
D6T Track-Type Tractor Hydraulic System Control Valve (Implement)
C13 Engines for Caterpillar Built Machines Mounting Straps
C6.6 Industrial Engine Water Pump
C4.4 Industrial Engine Engine Crankcase Breather Element - Replace
623H Wheel Tractor-Scraper Differential Thrust Pin Clearance - Check
2010/07/23 Procedure to Install the New Air Baffle Gp and Insulation to AD55B Underground Articulated Trucks is Now Available {1806}
D6T Track-Type Tractor Electronic Control Systems MID 113 - CID 2500 - FMI 08
374F Excavator Window - Check
2010/04/07 New Software Is Now Available For Engines On Small Wheel Loaders {1920}
Replacing Base Edge Assemblies In Large Wheel Loader Buckets{0679, 6101, 6102, 6131, 6132, 6801, 6818} Replacing Base Edge Assemblies In Large Wheel Loader Buckets{0679, 6101, 6102, 6131, 6132, 6801, 6818}
D6T Track-Type Tractor Electronic Control Systems MID 113 - CID 0596 - FMI 09
D6T Track-Type Tractor Electronic Control Systems MID 113 - CID 0596 - FMI 14
IT28G Integrated Toolcarrier and 924G, 924GZ and 928G Wheel Loaders MID 081 - CID 0070 - FMI 03
D11R Track-Type Tractor Power Train Transmission Solenoid - Test
D6T Track-Type Tractor Systems Signal Resolver Network
914G Wheel Loader Operator Controls
D6T Track-Type Tractor Hydraulic System Accumulator (Pilot)
914G Compact Wheel Loader and IT14G Integrated Toolcarrier Alert Indicators
2010/04/30 A New Procedure Is Now Available For Installing A Wiring Harness On The 657G Wheel Tractor-Scraper {1408, 1901, 7406, 7451}
Loss of Configuration Parameters in the Electronic Control Module (ECM) of Certain Machine Engines {1901, 1920} Loss of Configuration Parameters in the Electronic Control Module (ECM) of Certain Machine Engines {1901, 1920}
914G Wheel Loader Engine Starting