2010/04/30 Caterpillar


A New Procedure Is Now Available For Installing A Wiring Harness On The 657G Wheel Tractor-Scraper {1408, 1901, 7406, 7451}

Usage:

657G A4G
Wheel Tractor-Scraper:
657G (S/N: W1B1-147; W1C1-284; W1E1-320; W1F1-175; A4G1-100; GER1-100)

A new procedure is now available for installing a wiring harness on the 657G Wheel Tractor-Scraper. The new 313-7454 Wiring Harness (JUMPER) is used to incorporate a solution for the rear surge in the engine that is caused by the back up alarm that is connected to a production harness. The Special Instruction, REHS5178, "Procedure to Install Wiring Harness in Order to Correct Rear Engine RPM Surge on the 657G Wheel Tractor-Scraper" provides the necessary instructions for installing the harness.

Caterpillar Information System:

914G Compact Wheel Loader and IT14G Integrated Toolcarrier Alert Indicators
D6T Track-Type Tractor Hydraulic System Accumulator (Pilot)
914G Wheel Loader Operator Controls
D6T Track-Type Tractor Systems Signal Resolver Network
D11R Track-Type Tractor Power Train Transmission Solenoid - Test
IT28G Integrated Toolcarrier and 924G, 924GZ and 928G Wheel Loaders MID 081 - CID 0070 - FMI 03
D6T Track-Type Tractor Electronic Control Systems MID 113 - CID 0596 - FMI 14
D6T Track-Type Tractor Electronic Control Systems MID 113 - CID 0596 - FMI 09
Replacing Base Edge Assemblies In Large Wheel Loader Buckets{0679, 6101, 6102, 6131, 6132, 6801, 6818} Replacing Base Edge Assemblies In Large Wheel Loader Buckets{0679, 6101, 6102, 6131, 6132, 6801, 6818}
C9.3 Engines for Caterpillar Built Machines Atmospheric Pressure Sensor - Remove and Install
IT28G Integrated Toolcarrier and 924G, 924GZ and 928G Wheel Loaders MID 081 - CID 0041 - FMI 04
IT28G Integrated Toolcarrier and 924G, 924GZ and 928G Wheel Loaders MID 081 - CID 0041 - FMI 03
Loss of Configuration Parameters in the Electronic Control Module (ECM) of Certain Machine Engines {1901, 1920} Loss of Configuration Parameters in the Electronic Control Module (ECM) of Certain Machine Engines {1901, 1920}
914G Wheel Loader Engine Starting
349F and 352F Excavators Machine System Pump Control (Main Hydraulic) - Main Pump Regulator
D6T Track-Type Tractor Electronic Control Systems MID 113 - CID 0590 - FMI 09
D6T Track-Type Tractor Electronic Control Systems MID 113 - CID 0590 - FMI 14
2010/04/12 A New Solenoid Valve Group Is Now Used On Certain Wheel Tractor-Scrapers {5479}
914G2 and IT14G2 Compact Wheel Loaders Stopping the Engine if an Electrical Malfunction Occurs
Removal and Installation of Unit Injectors on 3114, 3116, and 3126 MUI Engines{1251, 1290} Removal and Installation of Unit Injectors on 3114, 3116, and 3126 MUI Engines{1251, 1290}
914G2 and IT14G2 Compact Wheel Loaders Circuit Breakers - Reset
834G Wheel Dozer and 836G Landfill Compactor Steering System Relief Valve (Steering Cylinder Crossover) - Test and Adjust
D6T Track-Type Tractor Hydraulic System Modes of Operation (Fan Hydraulic System)
914G2 and IT14G2 Compact Wheel Loaders Fuel System Filter and Water Separator Element - Replace
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.