2009/06/15 Caterpillar


New Software Is Now Used For Elevated Idle {1901, 1902, 1920}

Usage:

621G DBB
Wheel Tractor-Scraper:
621G (S/N: DBB1-UP)
623G (S/N: DBC1-UP)
627G (S/N: DBD1-UP)
631G (S/N: DFA1-UP)
637G (S/N: DFJ1-UP)
657G (S/N: W1B1-UP)
657G (S/N: W1C1-UP)

Description of Change: New software is now used. The new software provides an elevated idle speed for wheeled tractor-scrapers with engines that are cold. Elevated engine idle in cold ambient conditions improves the operation of the engine.

Table 1
Flash Files for Wheel Tractor-Scrapers    
Model     Software Part Number    
620 Front     3286012.fls (1)    
630 Front     3390927.fls    
637 Rear     3390928.fls    
657 Front     3272227.fls    
657 Rear     3028858.fls    
( 1 ) The extension ".fls" does not need to be used when you perform the search on SIS Web.

SIS Web Search for Software Down Load

Perform the following steps in order to find the software files that are needed.




    Illustration 1g01933396

  1. Open SIS Web. On the "Main Menu", click on "Service Software Files" (1). Refer to Illustration 1.



    Illustration 2g01933398

  1. After the "Service Software Files" dialog opens, click on "Flash Files-ECM Software Files". Refer to Illustration 2.



    Illustration 3g01933400

  1. After the "Flash Files-ECM Software Files" dialog opens, type the part number for the flash file in the "Flash File" field (3). Click "Search" (4). Refer to Illustration 3. The link (5) for the flash file will appear.

  1. Click on the link (5) .

  1. A "File Download" dialog will appear with the options to "Open", "Save", or "Cancel".

  1. Click on "Save". Select the desired location for saving the file. The file can then be executed.

Adaptable To: The new software is adaptable to the serial numbers that are listed above. The new software is effective with the serial numbers that are listed in Table 2.

Table 2
The New Software is Effective with the Following Serial Numbers:    
Model     Effective Serial Number    
621G     (S/N: DBB642-UP)    
623G     (S/N: DBC506-UP)    
627G     (S/N: DBD908-UP)    
631G     (S/N: DFA356-UP)    
637G     (S/N: DFJ351-UP)    
657G     (S/N: W1B135-UP)    
657G     (S/N: W1C281-UP)    

Caterpillar Information System:

CUSTOM SERVICE INFORMATION for the 980H UNDERGROUND MINE AR {1050, 1051, 4250, 4267, 4300, 4307, 4330, 5050, 5109, 5112, 5134, 7000} CUSTOM SERVICE INFORMATION for the 980H UNDERGROUND MINE AR {1050, 1051, 4250, 4267, 4300, 4307, 4330, 5050, 5109, 5112, 5134, 7000}
C9.3 Engines for Caterpillar Built Machines Fuel Manifold - Remove and Install - Return
3500B Engines Air Shutoff
973D Track-Type Loader Hydraulic System General Information
D7E Track-Type Tractor Lifting and Tying Down the Machine
2009/06/01 The Torque Value on the Wheel Nut for the 906H, 907H, and 908H Compact Wheel Loader Has Been Updated {4202, 4209, 4210}
988G Wheel Loader Power Train Torque Converter (Lockup) - Assemble - Type 2
D6T Track-Type Tractor Hydraulic System Piston Pump (Steering)
C9.3 Tier 4 Final Engines Water Lines
C9.3 Engines for Caterpillar Built Machines Relief Valve (Fuel) - Remove and Install
C9.3 Engines for Caterpillar Built Machines Fuel Manifold (Rail) - Remove and Install
D6T Track-Type Tractor Hydraulic System Piston Pump (Implement)
973D Track-Type Loader Monitoring System
C13 Engines for Caterpillar Built Machines Fuel System - Prime
C13 Engines for Caterpillar Built Machines Fuel System Pressure - Test
973D Track-Type Loader Hydraulic System Piston Pump
973D Track-Type Loader Ether Starting Aid Cylinder - Replace
D7E Track-Type Tractor Declaration of Conformity
2009/06/15 New Sensors Are Now Available For the Implement Control Lever On Certain Track-Type Tractors {5737}
2009/09/07 Protective Covers For the Joint On the Equalizer Bar Are Now Used {7206}
973D Track-Type Loader Hydraulic System Tilt Circuit
2009/06/15 The Engine Enclosure May Need to Be Updated {7267, 7276}
966H Wheel Loader and 972H Wheel Loader Power Train Temperature Sensor (Front Axle Oil) (Rear Axle Oil)
973D Track-Type Loader Hydraulic System Bucket Control
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.