C9.3 Engines for Caterpillar Built Machines Caterpillar


Fuel Manifold - Remove and Install - Return

Usage:

336E L BMH

拆卸步骤

开始:

  1. 拆下排气传感器管。
  2. 拆下排气阀。


注意

保持所有零件清洁无杂质。

杂质会造成快速磨损和缩短部件寿命。



注意

在检验、保养、测试、调整及维修发动机时,请小心确保盛接流出的液体。 在打开或拆解任何储有液体的部件之前,要准备好合适的容器收集液体。

有关适合收集和盛接卡特彼勒产品上的液体的工具和供应品,请参阅专门出版物, NENG2500, "卡特彼勒代理商工具目录"。

按照本地法规和条例处置所有液体。





    图 1g01927253

    控制歧管位于发动机控制模块上方。

  1. 拆下螺栓 (1) ,然后断开管组件 (4) 。

  1. 拆下管组件 (2) 和 (3) 。

  1. 断开管组件 (5) 。



    图 2g01927327

  1. 拆下螺栓 (6) ,然后拆下燃油歧管 (7) 。



    图 3g01927577

  1. 拆下单向阀 (8) 和 (9) 。



    图 4g01927606

  1. 拆下 O 形密封圈 (10) 和 (11) 。 从单向阀 (8) 上拆下支承环 (11) 。

安装步骤

  1. 按照相反顺序安装燃油歧管。

    1. 将单向阀 (8) 至拧紧扭矩为 28 ± 3 N·m (21 ± 2 lb ft)。

Caterpillar Information System:

3500B Engines Air Shutoff
973D Track-Type Loader Hydraulic System General Information
D7E Track-Type Tractor Lifting and Tying Down the Machine
2009/06/01 The Torque Value on the Wheel Nut for the 906H, 907H, and 908H Compact Wheel Loader Has Been Updated {4202, 4209, 4210}
988G Wheel Loader Power Train Torque Converter (Lockup) - Assemble - Type 2
D6T Track-Type Tractor Hydraulic System Piston Pump (Steering)
C9.3 Tier 4 Final Engines Water Lines
C9.3 Engines for Caterpillar Built Machines Relief Valve (Fuel) - Remove and Install
C9.3 Engines for Caterpillar Built Machines Fuel Manifold (Rail) - Remove and Install
D6T Track-Type Tractor Hydraulic System Piston Pump (Implement)
3500B Engines for Caterpillar Built Power Modules Fuel Injector Mechanism
973D Track-Type Loader Machine Systems Fuel Tank
CUSTOM SERVICE INFORMATION for the 980H UNDERGROUND MINE AR {1050, 1051, 4250, 4267, 4300, 4307, 4330, 5050, 5109, 5112, 5134, 7000} CUSTOM SERVICE INFORMATION for the 980H UNDERGROUND MINE AR {1050, 1051, 4250, 4267, 4300, 4307, 4330, 5050, 5109, 5112, 5134, 7000}
2009/06/15 New Software Is Now Used For Elevated Idle {1901, 1902, 1920}
973D Track-Type Loader Monitoring System
C13 Engines for Caterpillar Built Machines Fuel System - Prime
C13 Engines for Caterpillar Built Machines Fuel System Pressure - Test
973D Track-Type Loader Hydraulic System Piston Pump
973D Track-Type Loader Ether Starting Aid Cylinder - Replace
D7E Track-Type Tractor Declaration of Conformity
2009/06/15 New Sensors Are Now Available For the Implement Control Lever On Certain Track-Type Tractors {5737}
2009/09/07 Protective Covers For the Joint On the Equalizer Bar Are Now Used {7206}
973D Track-Type Loader Hydraulic System Tilt Circuit
2009/06/15 The Engine Enclosure May Need to Be Updated {7267, 7276}
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.