Declaration of Conformity
Show/hide table
An EC Declaration of Conformity document was provided with the machine if it was manufactured to comply with specific requirements for the European Union. In order to determine the details of the applicable Directives, review the complete EC Declaration of Conformity provided with the machine. The extract shown below from an EC Declaration of Conformity for machines that are declared compliant to "2006/42/EC" applies only to those machines originally "CE" marked by the manufacturer listed and which have not since been modified. | ||||||
EC DECLARATION OF CONFORMITY OF MACHINERY | ||||||
Manufacturer: Caterpillar Inc., 100 N.E. Adams Street, Peoria, IL 61629 USA | ||||||
Person authorized to compile the Technical File and to communicate relevant part (s) of the Technical File to the Authorities of European Union Member States on request: | ||||||
Standards & Regulations Manager,Caterpillar France S.A.S 40,
Avenue Leon-Blum, B.P. 55, 38041 Grenoble Cedex 9, France |
||||||
I, the undersigned, _________, hereby certify that the construction equipment specified hereunder | ||||||
Description: | Generic Denomination: | Earthmoving equipment | ||||
Function: | Steel track dozer | |||||
Model/Type: | D7E | |||||
Serial Number: | ||||||
Commercial Name: | Caterpillar
|
|||||
Fulfils all the relevant provisions of the following Directives | ||||||
Directives | Notified Body | Document No. | ||||
2006/42/EC | ||||||
2000/14/EC amended by 2005/88/EC, Note (1) | ||||||
2004/108/EC | ||||||
Note (1) | Annex -- ___ Guaranteed Sound Power Level - ____ dB (A)
Representative Equipment Type Sound Power Level - ____ dB (A) Engine Power per _____ kW Rated engine speed - _____ rpm Technical Documentation accessible through person listed above authorized to compile the Technical File |
|||||
Done at: | Signature | |||||
Date: | Name/Position | |||||
Note: The above information was correct as of November 2009, but may be subject to change, please refer to the individual declaration of conformity issued with the machine for exact details. |
Caterpillar Information System:
973D Track-Type Loader Ether Starting Aid Cylinder - Replace
973D Track-Type Loader Hydraulic System Piston Pump
C13 Engines for Caterpillar Built Machines Fuel System Pressure - Test
C13 Engines for Caterpillar Built Machines Fuel System - Prime
973D Track-Type Loader Monitoring System
2009/06/15 New Software Is Now Used For Elevated Idle {1901, 1902, 1920}
CUSTOM SERVICE INFORMATION for the 980H UNDERGROUND MINE AR {1050, 1051, 4250, 4267, 4300, 4307, 4330, 5050, 5109, 5112, 5134, 7000} CUSTOM SERVICE INFORMATION for the 980H UNDERGROUND MINE AR {1050, 1051, 4250, 4267, 4300, 4307, 4330, 5050, 5109, 5112, 5134, 7000}
C9.3 Engines for Caterpillar Built Machines Fuel Manifold - Remove and Install - Return
3500B Engines Air Shutoff
973D Track-Type Loader Hydraulic System General Information
D7E Track-Type Tractor Lifting and Tying Down the Machine
2009/06/01 The Torque Value on the Wheel Nut for the 906H, 907H, and 908H Compact Wheel Loader Has Been Updated {4202, 4209, 4210}
2009/06/15 New Sensors Are Now Available For the Implement Control Lever On Certain Track-Type Tractors {5737}
2009/09/07 Protective Covers For the Joint On the Equalizer Bar Are Now Used {7206}
973D Track-Type Loader Hydraulic System Tilt Circuit
2009/06/15 The Engine Enclosure May Need to Be Updated {7267, 7276}
966H Wheel Loader and 972H Wheel Loader Power Train Temperature Sensor (Front Axle Oil) (Rear Axle Oil)
973D Track-Type Loader Hydraulic System Bucket Control
973D Track-Type Loader Hydraulic System Multipurpose Bucket Circuit
973D Track-Type Loader Hydraulic System Signal Resolver Network
C9.3 Tier 4 Final Engines Exhaust Gas Valve (NRS)
973D Track-Type Loader Hydraulic System Ripper Circuit
D5R Track-Type Tractor Implement Cycle Time Is Slow
C9.3 Tier 4 Final Engines General Information