New Sensors Are Now Available For the Implement Control Lever On Certain Track-Type Tractors {5737}
- Track-Type Tractor:
- D8T (S/N: J8B1-UP; KPZ1-UP)
- D9T (S/N: RJS1-UP)
- D10R (S/N: AKT1-UP)
- D10T (S/N: RJG1-UP)
- D11R (S/N: AAF1-UP; 9XR1-UP; 7PZ1-UP)
- D11T (S/N: GEB1-UP)
New sensors are now available for the 226-7420 Ripper Control. The 266-1474 Position Sensor Gp that controls the shank in and the shank out replaces the 219-2390 Position Sensor Gp. The 266-1475 Position Sensor Gp that controls the raising and the lowering of the ripper replaces the 219-2391 Position Sensor Gp. The new sensors will improve the reliability of the implement control lever.
The new sensors are adaptable to the machines that are listed above.
Required Parts
Show/hide table
Required Parts     | |||
New Part Number     | Description     | Former Part Number     | Quantity     |
266-1474     | Position Sensor Gp     | 219-2390     | 1     |
266-1475     | Position Sensor Gp     | 219-2391     | 1     |
Rework Procedure
- Remove the plate and the control group from the console.
Show/hide table
Illustration 1 | g01931468 |
- Disconnect the electrical connections.
- Unbolt the plate from the control group.
- Replace the 219-2390 Position Sensor Gp with a new 266-1474 Position Sensor Gp. Replace the 219-2391 Position Sensor Gp with a new 266-1475 Position Sensor Gp .
- Mount the control group to the plate.
- Connect the electrical connections.
- Mount the plate and the control group to the console.
Caterpillar Information System:
D7E Track-Type Tractor Declaration of Conformity
973D Track-Type Loader Ether Starting Aid Cylinder - Replace
973D Track-Type Loader Hydraulic System Piston Pump
C13 Engines for Caterpillar Built Machines Fuel System Pressure - Test
C13 Engines for Caterpillar Built Machines Fuel System - Prime
973D Track-Type Loader Monitoring System
2009/06/15 New Software Is Now Used For Elevated Idle {1901, 1902, 1920}
CUSTOM SERVICE INFORMATION for the 980H UNDERGROUND MINE AR {1050, 1051, 4250, 4267, 4300, 4307, 4330, 5050, 5109, 5112, 5134, 7000} CUSTOM SERVICE INFORMATION for the 980H UNDERGROUND MINE AR {1050, 1051, 4250, 4267, 4300, 4307, 4330, 5050, 5109, 5112, 5134, 7000}
C9.3 Engines for Caterpillar Built Machines Fuel Manifold - Remove and Install - Return
3500B Engines Air Shutoff
973D Track-Type Loader Hydraulic System General Information
D7E Track-Type Tractor Lifting and Tying Down the Machine
2009/09/07 Protective Covers For the Joint On the Equalizer Bar Are Now Used {7206}
973D Track-Type Loader Hydraulic System Tilt Circuit
2009/06/15 The Engine Enclosure May Need to Be Updated {7267, 7276}
966H Wheel Loader and 972H Wheel Loader Power Train Temperature Sensor (Front Axle Oil) (Rear Axle Oil)
973D Track-Type Loader Hydraulic System Bucket Control
973D Track-Type Loader Hydraulic System Multipurpose Bucket Circuit
973D Track-Type Loader Hydraulic System Signal Resolver Network
C9.3 Tier 4 Final Engines Exhaust Gas Valve (NRS)
973D Track-Type Loader Hydraulic System Ripper Circuit
D5R Track-Type Tractor Implement Cycle Time Is Slow
C9.3 Tier 4 Final Engines General Information
973D Track-Type Loader Hydraulic System Lift Circuit