3500B Engines Caterpillar


Air Shutoff

Usage:

3508B 7SM


图 1g02596659
后视图


图 2g02596660

表 1
技术规格 - 214-5543 空气切断阀总成 
项目  数量  零件  技术规格说明 
272-7094 空气切断阀总成  阀的最大工作温度为 204 °C (399 °F)。 
阀的最大工作压力为 300 kPa (44 psi)
227-7483 限制开关组件  拧紧至扭矩为 16.3 N·m (12.0 lb ft)。 
在将限制开关组件 (2) 组装到切断阀前,在螺塞螺纹上涂敷 4C-5599 防咬合剂。
215-2589 螺栓  拧紧至扭矩为 7 ± 1 N·m (62 ± 9 lb in)。 
4C-5599 防咬合剂涂敷到螺栓 (3) 和螺栓 (7) 的螺纹上。
215-2706 空气切断阀组件  在空气切断阀组件的轴上涂抹 4C-5599 防咬合剂。 
装配前,在车身 (5) 和盖 (6) 之间涂抹 4C-9614 硅密封剂。 
215-2587 螺栓  拧紧至扭矩为 9.5 ± 1.5 N·m (84.1 ± 13.3 lb in)。 
230-4073 电磁阀组件  工作电压为 18 至 32 VDC。 
25 °C (77 °F) 下的电阻为 1.485 至 1.815 欧姆。
将螺栓 (8) 拧紧至 9.5 ± 1.5 N·m (84.1 ± 13.3 lb in)

Caterpillar Information System:

973D Track-Type Loader Hydraulic System General Information
D7E Track-Type Tractor Lifting and Tying Down the Machine
2009/06/01 The Torque Value on the Wheel Nut for the 906H, 907H, and 908H Compact Wheel Loader Has Been Updated {4202, 4209, 4210}
988G Wheel Loader Power Train Torque Converter (Lockup) - Assemble - Type 2
D6T Track-Type Tractor Hydraulic System Piston Pump (Steering)
C9.3 Tier 4 Final Engines Water Lines
C9.3 Engines for Caterpillar Built Machines Relief Valve (Fuel) - Remove and Install
C9.3 Engines for Caterpillar Built Machines Fuel Manifold (Rail) - Remove and Install
D6T Track-Type Tractor Hydraulic System Piston Pump (Implement)
3500B Engines for Caterpillar Built Power Modules Fuel Injector Mechanism
973D Track-Type Loader Machine Systems Fuel Tank
973D Track-Type Loader Hydraulic System Hydraulic Tank (Power Train and Implement)
C9.3 Engines for Caterpillar Built Machines Fuel Manifold - Remove and Install - Return
CUSTOM SERVICE INFORMATION for the 980H UNDERGROUND MINE AR {1050, 1051, 4250, 4267, 4300, 4307, 4330, 5050, 5109, 5112, 5134, 7000} CUSTOM SERVICE INFORMATION for the 980H UNDERGROUND MINE AR {1050, 1051, 4250, 4267, 4300, 4307, 4330, 5050, 5109, 5112, 5134, 7000}
2009/06/15 New Software Is Now Used For Elevated Idle {1901, 1902, 1920}
973D Track-Type Loader Monitoring System
C13 Engines for Caterpillar Built Machines Fuel System - Prime
C13 Engines for Caterpillar Built Machines Fuel System Pressure - Test
973D Track-Type Loader Hydraulic System Piston Pump
973D Track-Type Loader Ether Starting Aid Cylinder - Replace
D7E Track-Type Tractor Declaration of Conformity
2009/06/15 New Sensors Are Now Available For the Implement Control Lever On Certain Track-Type Tractors {5737}
2009/09/07 Protective Covers For the Joint On the Equalizer Bar Are Now Used {7206}
973D Track-Type Loader Hydraulic System Tilt Circuit
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.