Electronic Display Module - Optional
The option for the electronic display module for this engine is the Caterpillar Monitoring System. This module can display diagnostic data from the engine control system. Three switches are used to select various operating modes and display modes. The three switches are permanently mounted to the instrument panel.
Show/hide table
Illustration 1 | g01259855 |
Caterpillar Monitoring System (1) Quad gauges (2) Main display module (3) Scroll switch (4) Clear mode switch (5) LH RH switch (6) Action alarm (7) Alarm silence (8) Backlight adjustment |
Show/hide table
Illustration 2 | g01582815 |
(9) Start/Stop switch
(10) "ECM reset switch" (11) Emergency stop push button (12) Connector "A" (13) TB1 (14) TB2 (15) Start enable relay (16) Connector "B" (17) Overspeed verify switch (18) General alarm relay (19) Shutdown notify relay (20) Connector "G" (21) Connector "E" (22) Connector "F" |
Caterpillar Information System:
C15 On-Highway Engine Electronic Unit Injector - Install
C15 On-Highway Engine Electronic Unit Injector - Remove
C15 On-Highway Engine Rocker Arm and Shaft - Install
C15 On-Highway Engine Rocker Arm and Shaft - Remove
C4.4 Industrial Engine Water Pump - Inspect
2006/05/22 New Water Cooled Exhaust Manifold {1059}
C7 PETROLEUM Petroleum Engine Camshaft - Install
C4.4 (Mech) Industrial Engine V-Belts - Inspect/Adjust/Replace
C7 PETROLEUM Petroleum Engine Camshaft - Remove
3500B and 3500C Locomotive Engines Throttle Position Sensor
C4.4 Industrial Engine Walk-Around Inspection
C7 PETROLEUM Petroleum Engine Lifter Group - Remove and Install
C4.4 Industrial Engine Reference Material
C4.4 Industrial Engine Hoses and Clamps - Inspect/Replace
2006/04/01 Clearly Mark all of the Cracks on the Cylinder Head Including Remanufactured Engines with Serial Number Prefix 7XC {1101, 7754}
C13 and C15 On-highway Engines Engine Rating Parameters
CX31 On-Highway Transmission Modulating Valve (Torque Converter Lockup Clutch) - Test
AccuGrade® GPS (CD700) Setup Menu
C7 PETROLEUM Petroleum Engine Coolant Temperature Sensor - Remove and Install
C7 On-Highway Engine Cylinder Head - Remove
CX31-P600 Petroleum Transmission Transmission Planetary
C7 PETROLEUM Petroleum Engine Engine Oil Pressure Sensor - Remove and Install
2006/04/10 Clearly Mark all of the Cracks on the Cylinder Head Including Remanufactured Engines with Serial Number Prefixes 1WW, BFF, DLA, BFD, BKY, BLR, ECP, BGE, BKS, BLJ, B1A, BNF and 2MZ {1101, 7754}
2006/08/14 A New Piston Cooling Jet Assembly Has Been Released {1331}