Rocker Arm and Shaft - Remove
拆卸步骤
Show/hide table
所需工具     | |||
---|---|---|---|
工具     | 零件号     | 零件说明     | 数量     |
A     | 124-2946     | 提升支架     | 1     |
开始:
- 拆下可变气门执行器。 请参阅拆解和组装, "气门执行器(可变) - 拆卸"。
Show/hide table
注意 |
---|
保持所有零件清洁无杂质。 杂质会造成快速磨损和缩短部件寿命。 |
- 将螺柱 (1) 从摇臂轴组件 (2) 上拆下。
Show/hide table
图 1 | g01259735 |
Show/hide table
螺栓拆下之后,气门摇臂和单体喷油器摇臂应该可以在轴上移动。 从缸盖上拆下时,应保持轴水平。 为了避免可能的人身伤害,当把组件从缸盖上抬起时,保持手指远离气门摇臂和单体喷油器摇臂。 |
- 利用工具 (A) 拆下摇臂轴组件 (2) 。
Show/hide table
图 2 | g01262841 |
Caterpillar Information System:
C4.4 Industrial Engine Water Pump - Inspect
2006/05/22 New Water Cooled Exhaust Manifold {1059}
C7 PETROLEUM Petroleum Engine Camshaft - Install
C4.4 (Mech) Industrial Engine V-Belts - Inspect/Adjust/Replace
C7 PETROLEUM Petroleum Engine Camshaft - Remove
3500B and 3500C Locomotive Engines Throttle Position Sensor
C4.4 Industrial Engine Walk-Around Inspection
C7 PETROLEUM Petroleum Engine Lifter Group - Remove and Install
C7 On-Highway Engine Valve Mechanism Cover Base - Remove and Install
2006/04/17 "Tool and Shop Products Guide" by the Cat Service Technology Group (CSTG) Has Been Replaced by Two New Catalogs {0374}
2006/05/01 New Location for the Magneto's Vent {1552}
C7 PETROLEUM Petroleum Engine Cylinder Head - Install
C15 On-Highway Engine Rocker Arm and Shaft - Install
C15 On-Highway Engine Electronic Unit Injector - Remove
C15 On-Highway Engine Electronic Unit Injector - Install
3500B and 3500C Locomotive Engines Electronic Display Module - Optional
C4.4 Industrial Engine Reference Material
C4.4 Industrial Engine Hoses and Clamps - Inspect/Replace
2006/04/01 Clearly Mark all of the Cracks on the Cylinder Head Including Remanufactured Engines with Serial Number Prefix 7XC {1101, 7754}
C13 and C15 On-highway Engines Engine Rating Parameters
CX31 On-Highway Transmission Modulating Valve (Torque Converter Lockup Clutch) - Test
AccuGrade® GPS (CD700) Setup Menu
C7 PETROLEUM Petroleum Engine Coolant Temperature Sensor - Remove and Install
C7 On-Highway Engine Cylinder Head - Remove