Water Pump - Inspect
失效的水泵可能引起严重的发动机过热问题,进而导致以下情况:
- 缸盖中的裂纹
- 活塞咬缸
- 其它对发动机的潜在损害
Show/hide table
图 1 | g01249453 |
(1) 排气预留孔 |
注: 水泵水封由冷却系统的冷却液来润滑。 当发动机降温而零件收缩时,有少量渗漏发生是正常的。
目视检查水泵是否泄漏。 水泵是不可维修物件。 为了安装新水泵,请参见 解体和组装手册 , "水泵 - 拆卸和安装 ",或联系您的卡特彼勒 代理商。
Caterpillar Information System:
2006/05/22 New Water Cooled Exhaust Manifold {1059}
C7 PETROLEUM Petroleum Engine Camshaft - Install
C4.4 (Mech) Industrial Engine V-Belts - Inspect/Adjust/Replace
C7 PETROLEUM Petroleum Engine Camshaft - Remove
3500B and 3500C Locomotive Engines Throttle Position Sensor
C4.4 Industrial Engine Walk-Around Inspection
C7 PETROLEUM Petroleum Engine Lifter Group - Remove and Install
C7 On-Highway Engine Valve Mechanism Cover Base - Remove and Install
2006/04/17 "Tool and Shop Products Guide" by the Cat Service Technology Group (CSTG) Has Been Replaced by Two New Catalogs {0374}
2006/05/01 New Location for the Magneto's Vent {1552}
C7 PETROLEUM Petroleum Engine Cylinder Head - Install
3500B and 3500C Locomotive Engines Start/Run/Stop Switch
C15 On-Highway Engine Rocker Arm and Shaft - Remove
C15 On-Highway Engine Rocker Arm and Shaft - Install
C15 On-Highway Engine Electronic Unit Injector - Remove
C15 On-Highway Engine Electronic Unit Injector - Install
3500B and 3500C Locomotive Engines Electronic Display Module - Optional
C4.4 Industrial Engine Reference Material
C4.4 Industrial Engine Hoses and Clamps - Inspect/Replace
2006/04/01 Clearly Mark all of the Cracks on the Cylinder Head Including Remanufactured Engines with Serial Number Prefix 7XC {1101, 7754}
C13 and C15 On-highway Engines Engine Rating Parameters
CX31 On-Highway Transmission Modulating Valve (Torque Converter Lockup Clutch) - Test
AccuGrade® GPS (CD700) Setup Menu
C7 PETROLEUM Petroleum Engine Coolant Temperature Sensor - Remove and Install