Camshaft - Install
安装步骤
Show/hide table
所需工具     | |||
工具     | 零件号     | 零件描述     | 数量     |
A     | 1U-7638     | 磁力固定工具     | 12     |
- 小心在缸体中安装凸轮轴 (4) 。
Show/hide table
注意 |
---|
保持所有零件清洁无杂质。 杂质会造成快速磨损和缩短部件寿命。 |
Show/hide table
图 1 | g01259669 |
Show/hide table
图 2 | g01259668 |
Show/hide table
注意 |
---|
安装凸轮轴时,确保 1 号缸位于压缩行程的上止点,并且正时螺栓安装在飞轮里。 凸轮轴正时是非常重要的。 凸轮轴驱动齿轮上的正时标记必须对准惰轮上的正时标记。 更多信息,请参考技术规格手册。 |
- 确保凸轮轴驱动齿轮 (1) 、惰轮和曲轴齿轮上的正时标记对齐。
- 将气门挺柱下放到凸轮轴上。 拆下工具 (A) 。
- 将止推盘 (3) 和螺栓 (2) 安装到凸轮轴驱动齿轮 (1) 上。
- 将推杆安装到发动机内。
End By:
- 安装前盖。 请参阅 拆解和组装, "前盖 - 拆卸和安装"。
- 安装摇臂和轴。 请参阅 拆解和组装, "摇臂和轴 - 安装"。
Caterpillar Information System:
C4.4 (Mech) Industrial Engine V-Belts - Inspect/Adjust/Replace
C7 PETROLEUM Petroleum Engine Camshaft - Remove
3500B and 3500C Locomotive Engines Throttle Position Sensor
C4.4 Industrial Engine Walk-Around Inspection
C7 PETROLEUM Petroleum Engine Lifter Group - Remove and Install
C7 On-Highway Engine Valve Mechanism Cover Base - Remove and Install
2006/04/17 "Tool and Shop Products Guide" by the Cat Service Technology Group (CSTG) Has Been Replaced by Two New Catalogs {0374}
2006/05/01 New Location for the Magneto's Vent {1552}
C7 PETROLEUM Petroleum Engine Cylinder Head - Install
3500B and 3500C Locomotive Engines Start/Run/Stop Switch
2006/04/03 Replacement Criteria for Camshafts {1210}
2006/04/01 Replacement Criteria for Camshafts {1210}
2006/05/22 New Water Cooled Exhaust Manifold {1059}
C4.4 Industrial Engine Water Pump - Inspect
C15 On-Highway Engine Rocker Arm and Shaft - Remove
C15 On-Highway Engine Rocker Arm and Shaft - Install
C15 On-Highway Engine Electronic Unit Injector - Remove
C15 On-Highway Engine Electronic Unit Injector - Install
3500B and 3500C Locomotive Engines Electronic Display Module - Optional
C4.4 Industrial Engine Reference Material
C4.4 Industrial Engine Hoses and Clamps - Inspect/Replace
2006/04/01 Clearly Mark all of the Cracks on the Cylinder Head Including Remanufactured Engines with Serial Number Prefix 7XC {1101, 7754}
C13 and C15 On-highway Engines Engine Rating Parameters
CX31 On-Highway Transmission Modulating Valve (Torque Converter Lockup Clutch) - Test