Rocker Arm and Shaft - Remove
拆卸步骤
开始:
- 拆下气门机构盖。 请参阅拆解和组装, "气门机构盖 - 拆卸和安装"。
Show/hide table
| 注意 |
|---|
保持所有零件清洁无杂质。 杂质会造成快速磨损和缩短部件寿命。 |
- 在各个摇臂上作出识别标记，以便确定正确的安装位置。
- 松开螺母 (3) 和摇臂调整螺钉 (2) 。
Show/hide table
 | |
| 图 1 | g01259077 |
- 拆下螺栓 (1) 和摇臂轴 (4) 。
Caterpillar Information System:
3500B and 3500C Locomotive Engines Override Switch
2006/04/01 Improved Software is Now Used {7620}
C15 Industrial Engine Injector Solenoid Circuit - Test
3500B and 3500C Locomotive Engines Fuel Position Multiplier
UPS 120, UPS 150, UPS 250, UPS 300, UPS 301, UPS 500, UPS 600, UPS 750 and UPS 900 Uninterruptible Power Supplies System Startup (SMS) - Single Module System
3500B and 3500C Locomotive Engines Ether Injection System
C7 On-Highway Engine Combustion Body - Remove and Install
C7 On-highway Engine Air Inlet Cover
C9 Industrial Engines Inlet Air Temperature Sensor
3500B and 3500C Locomotive Engines Emergency Stop Switch
C7 PETROLEUM Petroleum Engine Valve Mechanism Cover Base - Remove and Install
CX31 On-Highway Transmission Relief Valve (Torque Converter Outlet) Pressure - Test and Adjust
C7 On-Highway Engine Fuel Manifold (Rail) - Remove and Install
3500B and 3500C Locomotive Engines Prelubrication System
C7 PETROLEUM Petroleum Engine Rocker Arm - Disassemble
3456 Generator Sets Maintenance Interval Schedule - Prime Power Generator Sets
3456 Generator Sets Maintenance Interval Schedule - Standby Generator Sets
C7 On-Highway Engine Fan Drive Mounting Group - Remove and Install
C7 PETROLEUM Petroleum Engine Rocker Arm and Shaft - Install
C7 PETROLEUM Petroleum Engine Rocker Arm - Assemble
C4.4 Industrial Engine Introduction
3500B and 3500C Locomotive Engines Pulse Width Modulated Sensor
3500B and 3500C Locomotive Engines Sensor Supply
Bench Test Procedure for a CX31 On-Highway Transmission and CX31-P600 Petroleum Transmission {3030, 3073} Bench Test Procedure for a CX31 On-Highway Transmission and CX31-P600 Petroleum Transmission {3030, 3073}