Air Inlet Cover
Show/hide table
 | |
| Illustration 1 | g01259641 |
(1) Apply 8C-8422 Sealant in order to cover the joint face of the air inlet cover. Spread uniformly across the cover. The cover must be installed and tightened within ten minutes of applying the sealant.
Caterpillar Information System:
C9 Industrial Engines Inlet Air Temperature Sensor
3500B and 3500C Locomotive Engines Emergency Stop Switch
C7 PETROLEUM Petroleum Engine Valve Mechanism Cover Base - Remove and Install
CX31 On-Highway Transmission Relief Valve (Torque Converter Outlet) Pressure - Test and Adjust
CX31 On-Highway Transmission Relief Valve (Torque Converter Inlet) Pressure - Test
CX31 On-Highway Transmission Hydraulic Oil Contamination - Test
3500B and 3500C Locomotive Engines Electrical Power Supply
C13 Tier 4 Final Engines Fuel Pressure Sensor
C7 On-Highway Engine Engine Oil Filter Base and Oil Cooler - Assemble
3500B and 3500C Locomotive Engines Cat Data Link
C7 On-Highway Engine Engine Oil Filter Base and Oil Cooler - Disassemble
TH31-C9I, TH31-C9P, TH31-C9T, TH35-C13I, TH35-C13T, TH35-C15I and TH35-C15T Petroleum Power Train Packages and TH31-E61 and TH35-E81 Petroleum Transmissions Transmission Gear Pump (Transmission)
C7 On-Highway Engine Combustion Body - Remove and Install
3500B and 3500C Locomotive Engines Ether Injection System
UPS 120, UPS 150, UPS 250, UPS 300, UPS 301, UPS 500, UPS 600, UPS 750 and UPS 900 Uninterruptible Power Supplies System Startup (SMS) - Single Module System
3500B and 3500C Locomotive Engines Fuel Position Multiplier
C15 Industrial Engine Injector Solenoid Circuit - Test
2006/04/01 Improved Software is Now Used {7620}
3500B and 3500C Locomotive Engines Override Switch
C7 PETROLEUM Petroleum Engine Rocker Arm and Shaft - Remove
C7 On-Highway Engine Fuel Manifold (Rail) - Remove and Install
3500B and 3500C Locomotive Engines Prelubrication System
C7 PETROLEUM Petroleum Engine Rocker Arm - Disassemble
3456 Generator Sets Maintenance Interval Schedule - Prime Power Generator Sets