Engine Oil Filter Base and Oil Cooler - Disassemble
Start By:
- Remove the engine oil filter base and the oil cooler. Refer to Disassembly and Assembly, "Engine Oil Filter Base and Oil Cooler - Remove".
- Remove plug (1). Remove O-ring seal (2). Remove spring (3). Remove valve (4).
- Remove plug (9). Remove O-ring seal (8). Remove spring (7). Remove valve (5).
- If necessary, remove stud (6).
Show/hide table
Illustration 1 | g01258209 |
Show/hide table
Personal injury can result from being struck by parts propelled by a released spring force. Make sure to wear all necessary protective equipment. Follow the recommended procedure and use all recommended tooling to release the spring force. |
Caterpillar Information System:
TH31-C9I, TH31-C9P, TH31-C9T, TH35-C13I, TH35-C13T, TH35-C15I and TH35-C15T Petroleum Power Train Packages and TH31-E61 and TH35-E81 Petroleum Transmissions Transmission Gear Pump (Transmission)
C9 Industrial Engines Jacket Water Heater
C9 Industrial Engines Jacket Water Heater
Inability to Flash ECM Software on Certain Generator Sets{7620} Inability to Flash ECM Software on Certain Generator Sets{7620}
C7 On-Highway Engine Engine Oil Filter Base and Oil Cooler - Install
C7 PETROLEUM Petroleum Engine Vibration Damper and Pulley - Remove and Install
C175 Generator Sets General Maintenance Information
3500B and 3500C Locomotive Engines CAN Data Link
2006/05/22 Improved Rectifier for Heat Sink Assembly {4465, 4472}
C9.3 Tier 4 Final Engines Coolant Temperature Sensor
C7 On-Highway Engine Engine Oil Filter Base and Oil Cooler - Remove
2006/04/01 A Reman Short Block has Been Released {1201}
3500B and 3500C Locomotive Engines Cat Data Link
C7 On-Highway Engine Engine Oil Filter Base and Oil Cooler - Assemble
C13 Tier 4 Final Engines Fuel Pressure Sensor
3500B and 3500C Locomotive Engines Electrical Power Supply
CX31 On-Highway Transmission Hydraulic Oil Contamination - Test
CX31 On-Highway Transmission Relief Valve (Torque Converter Inlet) Pressure - Test
CX31 On-Highway Transmission Relief Valve (Torque Converter Outlet) Pressure - Test and Adjust
C7 PETROLEUM Petroleum Engine Valve Mechanism Cover Base - Remove and Install
3500B and 3500C Locomotive Engines Emergency Stop Switch
C9 Industrial Engines Inlet Air Temperature Sensor
C7 On-highway Engine Air Inlet Cover
C7 On-Highway Engine Combustion Body - Remove and Install