Water Pump - Disassemble
拆解步骤
Show/hide table
所需工具     | |||
工具     | 零件号     | 零件描述     | 数量     |
A     | 1P-0510     | 冲头总成     | 1     |
开始:
- 拆下水泵。 请参阅拆解和组装, "水泵 - 拆卸"。
- 拆下 O 形密封圈 (1) 和 (2) 。
Show/hide table
图 1 | g01257371 |
- 拆下螺栓 (3) 和垫圈。 卸下后盖 (4) 和垫片 (5) 。
- 利用工具 (A) 和适当的压具将轮毂 (10) 和水泵壳 (8) 从轴 (9) 上拆下。
- 利用工具 (A) 和适当的压具将叶轮 (6) 从轴 (9) 上拆下。
- 利用工具 (A) 将密封 (7) 从水泵壳 (8) 上拆下。
Caterpillar Information System:
C7 On-highway Engine Air Inlet Elbow
C7 On-highway Engine Air Inlet Elbow
Installing Injectors on the 3116, 3116T, and 3126 Industrial Engines{1290} Installing Injectors on the 3116, 3116T, and 3126 Industrial Engines{1290}
C7 On-highway Engine Air Inlet Elbow
G3500 A3 Engines Measuring Engine Oil Pressure
C7 PETROLEUM Petroleum Engine Water Pump - Remove
G3500 A3 Engines Measuring Exhaust Temperature
G3500 A3 Engines Oxygen Sensor - Calibrate
C7 On-highway Engine Crankshaft Pulley
C15 On-Highway Engine Clean Gas Induction Valve - Assemble
C15 On-Highway Engine Clean Gas Induction Valve - Disassemble
C280 Marine Propulsion Engines User Defined Shutdown Input
3512B Petroleum Engine Product Storage
C7 PETROLEUM Petroleum Engine Water Pump - Assemble
C7 On-highway Engine Air Inlet Elbow
2006/04/01 Replace the Fuel Injector Hold-Down Bolt When You Service the Electronic Unit Injectors on Engines, Including Remanufactured Engines with Serial Number Prefix 3LZ, AKB, ALS or R1D {1251, 1254}
C7 PETROLEUM Petroleum Engine Water Pump - Install
2006/04/03 Replace the Fuel Injector Hold-Down Bolt When You Service the Electronic Unit Injectors on Engines, Including Remanufactured Engines with Serial Number Prefix 3LZ, AKB, ALS or R1D {1251, 1254}
C7 PETROLEUM Petroleum Engine Water Temperature Regulator Housing - Remove and Install
G3500 A3 Engines Electronic Service Tools
C7 On-Highway Engine Exhaust Manifold - Remove and Install
G3500 A3 Engines Cooling System
UPS 120, UPS 150, UPS 250, UPS 300, UPS 301, UPS 500, UPS 600, UPS 750 and UPS 900 Uninterruptible Power Supplies Power Sources
C7 PETROLEUM Petroleum Engine Flywheel - Remove and Install