Air Inlet Elbow
Show/hide table
Illustration 1 | g01257461 |
(1) Apply 1U-8846 Gasket Sealant to the face of the elbow and spread the sealant uniformly. The elbow must be assembled and the elbow must be tightened within ten minutes.
Show/hide table
Illustration 2 | g01257462 |
Bottom view |
Show/hide table
Illustration 3 | g01257471 |
Top view |
(X) Studs
(Y) Bolts
Caterpillar Information System:
C7 PETROLEUM Petroleum Engine Water Pump - Assemble
3512B Petroleum Engine Product Storage
C7 PETROLEUM Petroleum Engine Water Pump - Disassemble
C7 On-highway Engine Air Inlet Elbow
C7 On-highway Engine Air Inlet Elbow
Installing Injectors on the 3116, 3116T, and 3126 Industrial Engines{1290} Installing Injectors on the 3116, 3116T, and 3126 Industrial Engines{1290}
C7 On-highway Engine Air Inlet Elbow
G3500 A3 Engines Measuring Engine Oil Pressure
C7 PETROLEUM Petroleum Engine Water Pump - Remove
G3500 A3 Engines Measuring Exhaust Temperature
G3500 A3 Engines Oxygen Sensor - Calibrate
C7 On-highway Engine Crankshaft Pulley
2006/04/01 Replace the Fuel Injector Hold-Down Bolt When You Service the Electronic Unit Injectors on Engines, Including Remanufactured Engines with Serial Number Prefix 3LZ, AKB, ALS or R1D {1251, 1254}
C7 PETROLEUM Petroleum Engine Water Pump - Install
2006/04/03 Replace the Fuel Injector Hold-Down Bolt When You Service the Electronic Unit Injectors on Engines, Including Remanufactured Engines with Serial Number Prefix 3LZ, AKB, ALS or R1D {1251, 1254}
C7 PETROLEUM Petroleum Engine Water Temperature Regulator Housing - Remove and Install
G3500 A3 Engines Electronic Service Tools
C7 On-Highway Engine Exhaust Manifold - Remove and Install
G3500 A3 Engines Cooling System
UPS 120, UPS 150, UPS 250, UPS 300, UPS 301, UPS 500, UPS 600, UPS 750 and UPS 900 Uninterruptible Power Supplies Power Sources
C7 PETROLEUM Petroleum Engine Flywheel - Remove and Install
C7 On-Highway Engine Turbocharger - Install
3500B and 3500C Locomotive Engines Analog Sensor (Active)
C7 PETROLEUM Petroleum Engine Flywheel Housing - Remove and Install