Improved Routing of the Grease Line on Bucket Linkage {6513, 7510}
- Wheel Loader:
- 988H (S/N: BXY1-1899)
Description of Change: New pipe elbows, adapters, and pipe adapters are used to improve the routing of the autolube lines on the bucket control linkage. The former autolube lines could be damaged during operation in certain applications.
Adaptable To: The new pipe elbows, adapters, and pipe adapters are adaptable to the above listed machines.
Show/hide table
| Required parts for the conversion of the grease lines for the control linkage of the bucket (3.88 Meter Boom) | ||
| Quantity | Part Number | Description |
| 2 | 3B-6493 | Pipe Elbow |
| 2 | 8C-7575 | Adapter |
| 2 | 189-7536 (1) | Hose As |
| 2 | 002-0639 | Pipe Adapter |
| 2 | 5M-6214 | Pipe Plug |
Show/hide table
| ( 1 ) | This hose is not serviceable. The parts for one hose assembly are 30 cm (12 inch) of 171-9629 Hose and two 171-8964 Couplings . |
Show/hide table
| Required parts for the conversion of the grease lines for the control linkage of the bucket (4.25 Meter Boom) | ||
| Quantity | Part Number | Description |
| 2 | 3B-6493 | Pipe Elbow |
| 2 | 8C-7575 | Adapter |
| 2 | 189-7531 (1) | Hose As |
| 2 | 002-0639 | Pipe Adapter |
| 2 | 5M-6214 | Pipe Plug |
Show/hide table
| ( 1 ) | This hose is not serviceable. The parts for one hose assembly are 43 cm (17 inch) of 171-9629 Hose and two 171-8964 Couplings . |
Show/hide table
 | |
| Illustration 1 | g01461629 |
Link assembly (A) 25 degree angle for drilling hole (B) 8.7 mm (0.34 inch) diameter by 265.5 mm (10.5 inch) deep drill (C) 20 mm (0.78 inch) diameter by 12.7 mm (0.50 inch) deep spotface (D) 1/8-27 NPSF by 8.0 mm (.31 inch) min deep | |
Show/hide table
 | |
| Illustration 2 | g01473934 |
Improved grease lines group | |
Caterpillar Information System:
854K Wheel Dozer Cooling System Water Temperature Regulator - Replace
993K Wheel Loader Vital Information Management System (VIMS) MID 053 - CID 0271 - FMI 04
994F Wheel Loader Machine Systems Air System Pressure - Purge
993K Wheel Loader Vital Information Management System (VIMS) MID 053 - CID 0271 - FMI 03
993K Wheel Loader Vital Information Management System (VIMS) MID 053 - CID 0168 - FMI 04
Installation Procedure for the Caterpillar Machine Security System (MSS){7631} Installation Procedure for the Caterpillar Machine Security System (MSS){7631}
993K Wheel Loader Vital Information Management System (VIMS) MID 053 - CID 0168 - FMI 03
994F Wheel Loader Machine Systems Brake Accumulator - Assemble
2008/09/15 An Improved Steel Pilot Manifold Is Now Used {5264}
993K Wheel Loader Vital Information Management System (VIMS) MID 049 - CID 2448 - FMI 09
993K Wheel Loader Vital Information Management System (VIMS) MID 049 - CID 2448 - FMI 02
992K Wheel Loader Machine Systems Loader Frame and Rear Frame - Connect
993K Wheel Loader Vital Information Management System (VIMS) MID 053 - CID 0271 - FMI 05
2008/05/05 Improved Service Brake and Service Brake Lines Group Reduces Seal Leaks {4251, 4257}
Product Link Machine Wiring Harness{1408, 7606} Product Link Machine Wiring Harness{1408, 7606}
992K Wheel Loader and 854K Wheel Dozer Power Train STIC Control
Custom Product Support Literature for 972H Wheel Loaders that Are Equipped with the 303-4514 Steel Mill Arrangement {0374, 7000} Custom Product Support Literature for 972H Wheel Loaders that Are Equipped with the 303-4514 Steel Mill Arrangement {0374, 7000}
D10T and D11T Track-Type Tractors Remote Control Operator Controls
Replacement of the Cab Roof on Certain Caterpillar Machines {7301} Replacement of the Cab Roof on Certain Caterpillar Machines {7301}
993K Wheel Loader Power Train Calibrations (Cat ET)
993K Wheel Loader Power Train Calibrations (Operator Monitor)
993K Wheel Loader Vital Information Management System (VIMS) Output Components
966H Wheel Loader and 972H Wheel Loader Power Train MID 081 - CID 0621 - FMI 03
992K Wheel Loader and 854K Wheel Dozer Power Train Torque Converter and Pump Drive Housing