Engine Oil Tank (Metering, Oil Renewal System) - Install
Show/hide table
Required Tools | |||
Tool | Part Number | Part Description | Qty |
A | 138-7573 | Link Bracket | 2 |
Note: Cleanliness is an important factor. Before assembly, all parts should be thoroughly cleaned in cleaning fluid. Allow the parts to air dry. Wiping cloths or rags should not be used to dry parts. Lint may be deposited on the parts which may cause later trouble. Inspect all parts. If any parts are worn or damaged, use new parts for replacement.
- Attach Tooling (A) and a suitable lifting device to engine oil tank (10). The weight of engine oil tank (10) is approximately
63 kg (140 lb) . Position engine oil tank (10). Install bolts (11).Show/hide tableIllustration 3 g01403612 - Connect hose assemblies (9).
Show/hide table
Illustration 4 g01403613 - Install panel (8).
Show/hide table
Illustration 5 g01403615 - Connect harness assemblies (7). Install clips (6).
Show/hide table
Illustration 6 g01403609 - Install panel (5).
Show/hide table
Illustration 7 g01403607 - Install covers (1). Close doors (4). Install supports (2). Install grates (3).
- Fill the oil renewal system. Refer to Operation and Maintenance Manual, "Oil Renewal System Oil Level - Check ".
Show/hide table
Illustration 1 | g01403616 |
Show/hide table
Illustration 2 | g01405900 |
Caterpillar Information System:
Loss of Gear or Abnormal Noise During Operation{3073, 3157, 3167} Loss of Gear or Abnormal Noise During Operation{3073, 3157, 3167}
993K Wheel Loader VIMS Loader Payload System General Information
D7E Track-Type Tractor Power Train Oil Filter - Replace
Bolts Are Loosening on the Bottom of the Transmission Control{3073} Bolts Are Loosening on the Bottom of the Transmission Control{3073}
980H Wheel Loader Power Train Transmission Oil Pump
D7E Track-Type Tractor Power Train Oil Screens - Clean
993K Wheel Loader Vital Information Management System (VIMS) MID 049 - CID 2413 - FMI 03
2008/03/10 New Software is Now Available {1901, 1902, 7620}
980H Wheel Loader Power Train Torque Converter and Transmission Pressures
992K Wheel Loader and 854K Wheel Dozer Braking System Service Brake Wear Indicator - Check
D6K Track-Type Tractor Electrohydraulic Power Train Remote Transmission Stall - Test
992K Wheel Loader Electrohydraulic System Position Sensor (Lift Linkage) - Replace
Custom Product Support Literature for the 980H Wheel Loaders that are equipped with 284-2174 Steel Mill Arrangement {7000} Custom Product Support Literature for the 980H Wheel Loaders that are equipped with 284-2174 Steel Mill Arrangement {7000}
993K Wheel Loader Vital Information Management System (VIMS) MID 049 - CID 2413 - FMI 04
D10T and D11T Track-Type Tractors Remote Control Safety
993K Wheel Loader Steering System Pilot Valve (STIC Steering)
993K Wheel Loader Vital Information Management System (VIMS) MID 049 - CID 2414 - FMI 03
993K Wheel Loader Vital Information Management System (VIMS) MID 049 - CID 2414 - FMI 04
992K Wheel Loader Machine Systems Loader Frame and Rear Frame - Separate
992K Wheel Loader Machine Systems Loader Frame and Rear Frame - Connect
993K Wheel Loader Vital Information Management System (VIMS) MID 049 - CID 2448 - FMI 02
993K Wheel Loader Vital Information Management System (VIMS) MID 049 - CID 2448 - FMI 09
2008/09/15 An Improved Steel Pilot Manifold Is Now Used {5264}
994F Wheel Loader Machine Systems Brake Accumulator - Assemble