Electrical Input Components
Show/hide table
图 1 | g00330892 |
机具电子控制模块 (1) 接头 J1。 (2) 接头 J2。 |
机具 ECM 根据输入 ECM 的信息及内存中的信息做出决定。 然后,机具 ECM 通过输出发出相应响应。 机具 ECM 的输入输出与机器线束相连。 用触点接头 J1 和 J2。
输入
机器有几个输入设备。 输入设备通知机具 ECM 机器的操作条件。 机器的输入来自开关和传感器。 各开关可向机具 ECM 输入装置提供开路、接地或蓄电池正极信号。 传感器不断向机具 ECM 提供变化信号。 机具 ECM 的输入装置列于下表。
输入装置表
Cat®数据链路用于与机器上的其它电子控制模块通信。 数据链路是双向的。 ECM 可以通过数据链路接收信息。 ECM 可以通过数据链路发送信息。 数据链路允许与其它电子控制模块共享信息。 下面是一个不同电子控制模块之间通过数据链路传递信息的例子。
机具 ECM 的输入装置包括以下部件:
- "提升操纵杆位置"传感器(该传感器向 ECM 发出 PWM 信号。 该传感器用于表示"提升操纵"杆的位置。)
- "倾斜操纵杆位置"传感器(该传感器向 ECM 发出 PWM 信号。 该传感器用于表示倾斜操纵杆的位置。)
- "液压锁定"开关(该开关向 ECM 发出操作员想断开液压装置的信号。)
- "限位"设置开关(该开关用于设置后倾、提升杆升起和下降功能的限位位置。)
- "提升连杆"位置传感器(该传感器向 ECM 发出动臂相对于机器的位置的信号。)
- "倾斜连杆"位置传感器(该传感器向 ECM 发出铲斗相对于动臂的位置的信号。)
机具 ECM 从动力传动系 ECM 接收发动机速度信息。 机具 ECM 用这些信息进行标定。 机具 ECM 从动力传动系 ECM 接收有关钥匙起动开关的信息。 发动机起动过程中,机具 ECM 用这些信息停机。 机具 ECM 与 Caterpillar 监控系统交换故障诊断信息。 使用数据链路的所有电子控制模块均会有模块识别符(MID)。 机具 ECM 的 MID 是 082。 Caterpillar 监控系统显示故障代码。 MID 确定故障系统。
Caterpillar Information System:
992K Wheel Loader Electrohydraulic System Pilot Control Actuator Pressure - Check
854K Wheel Dozer Machine Systems Brake Accumulator - Install
854K Wheel Dozer Machine Systems Brake Accumulator - Remove
Troubleshooting for 930G Wheel Loaders that Exhibit Dead Implement Functions{4320, 5050, 5057} Troubleshooting for 930G Wheel Loaders that Exhibit Dead Implement Functions{4320, 5050, 5057}
993K Wheel Loader Steering System Piston Pump (Steering) Margin Pressure - Test and Adjust
992K Wheel Loader Electrohydraulic System Pressure Reducing Valve Pressure for Dead Engine Pilot Supply (Engine OFF) - Test and Adjust
992K Wheel Loader and 854K Wheel Dozer Power Train Differential and Bevel Gear - Install
993K Wheel Loader Steering System General Information (Steering)
IT38H Integrated Toolcarrier and 938H Wheel Loader Transmission Electronic Control System MID 081 - CID 0600 - FMI 04
Installation Instructions for the 301-6925 Joystick Control Gp (2-Function) and the 301-6926 Joystick Control Gp (3-Function) both with a transmission direction control switch{5063, 5705} Installation Instructions for the 301-6925 Joystick Control Gp (2-Function) and the 301-6926 Joystick Control Gp (3-Function) both with a transmission direction control switch{5063, 5705}
IT38H Integrated Toolcarrier and 938H Wheel Loader Transmission Electronic Control System MID 081 - CID 0600 - FMI 03
Installation Instructions for the 301-6928 Secondary Steering Ar (Kit){4300, 4304, 4324, 4334, 5927} Installation Instructions for the 301-6928 Secondary Steering Ar (Kit){4300, 4304, 4324, 4334, 5927}
992K Wheel Loader and 854K Wheel Dozer Power Train Differential and Bevel Gear - Disassemble
993K Wheel Loader Machine Systems Hydraulic Tank (Implement, Hydraulic Fan) - Disassemble
992K Wheel Loader Electrohydraulic System Electrical Output Components
854K Wheel Dozer Machine Systems Brake Control Valve (Service) - Remove and Install
992K Wheel Loader Electrohydraulic System Ride Control Signal Pressure - Check
IT38H Integrated Toolcarrier and 938H Wheel Loader Axle Oscillation Bearings - Lubricate
Planetary Final Drives for Wheel Loaders, Wheel Tractors, Compactors, Underground Articulated Trucks {4011, 4050, 4051} Planetary Final Drives for Wheel Loaders, Wheel Tractors, Compactors, Underground Articulated Trucks {4011, 4050, 4051}
IT38H Integrated Toolcarrier and 938H Wheel Loader Transmission Electronic Control System MID 081 - CID 0623 - FMI 03
IT38H Integrated Toolcarrier and 938H Wheel Loader Belt - Inspect/Adjust/Replace
IT38H Integrated Toolcarrier and 938H Wheel Loader Transmission Electronic Control System MID 081 - CID 0672 - FMI 08
IT38H Integrated Toolcarrier and 938H Wheel Loader Transmission Electronic Control System MID 081 - CID 0673 - FMI 08
C7 Engines for Caterpillar Built Machines Engine Oil Pan