Required Tools | |||
Tool | Part Number | Part Description | Qty |
A | 138-7575 | Link Brackets | 2 |
Start By:
- Remove the hydraulic tank. Refer to Disassembly and Assembly , "Hydraulic Tank (Implement, Hydraulic Fan) - Remove".
NOTICE |
---|
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting, and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids. Refer to Special Publication, NENG2500, "Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Cat® products. Dispose of all fluids according to local regulations and mandates. |
Note: Cleanliness is an important factor. Before the disassembly procedure, the exterior of the component should be thoroughly cleaned. This will help to prevent dirt from entering the internal mechanism.
Note: Put identification marks on all lines, on all hoses, on all wires, and on all tubes for installation purposes. Plug all lines, hoses, and tubes. This helps to prevent fluid loss and this helps to keep contaminants from entering the system.
- Disconnect harness assembly (1). Remove nut (2). Remove sensor (3). Remove bolts (6). Disconnect tube assembly (5). Remove valve assembly (4).
Show/hide table
Illustration 2 g01448079 - Remove nuts (8). Remove hydraulic oil filter (8).
Show/hide table
Illustration 3 g01448082 - Remove nuts (9). Remove baffle (10).
Show/hide table
Illustration 4 g01448085 - Disconnect harness assembly (11). Remove clips (12).
Show/hide table
Illustration 5 g01448087 - Disconnect hose assembly (14). Remove clips (13).
Show/hide table
Illustration 6 g01448089 - Remove bolts (15). Remove hydraulic tank (16).
Show/hide table
Illustration 7 g01448090 - Disconnect harness assembly (17). Remove light (18).
Show/hide table
Illustration 8 g01448091 - Disconnect harness assembly (20). Remove light (22). Remove bolts (21). Remove panel (19).
Show/hide table
Illustration 9 g01448092 - Attach Tooling (A) and a suitable lifting device to panel (24). The weight of panel (24) is approximately
40 kg (90 lb) . Remove bolts (23). Remove panel (24) and the gasket.Show/hide tableIllustration 10 g01448093 - Remove screen (25).
Show/hide table
Illustration 11 g01448094 - Remove screen (26).
Show/hide table
Illustration 12 g01450993 - Remove screen (27).
Show/hide table
Illustration 13 g01450994 - Loosen clamps (27). Disconnect hose (28).
Show/hide table
Illustration 14 g01450995 - Remove bolts (29). Remove manifold (30).
Illustration 1 | g01448074 |