Window Wiper and Wiper Motor (Front Quarter Window) - Remove
Note: Cleanliness is an important factor. Before the disassembly procedure, the exterior of the component should be thoroughly cleaned. This will help to prevent dirt from entering the internal mechanism.
- Remove arms (3). Remove screw (2). Remove cover (1).
Show/hide table
Illustration 2 g01439572 - Disconnect harness assembly (5). Remove bolts (4).
Show/hide table
Illustration 3 g01439573 - Remove bolts (6) and (8). Remove window wiper motor (7).
Show/hide table
| |
| Illustration 1 | g01439569 |
Caterpillar Information System:
993K Wheel Loader Power Train Transmission Planetary
992K Wheel Loader Electrohydraulic System Position Sensor (Tilt Linkage) - Calibrate
994F Wheel Loader Fuel Priming Pump and Primary Fuel Filter - Remove
993K Wheel Loader Power Train Features
992K Wheel Loader Electrohydraulic System Position Sensor (Lift Linkage) - Calibrate
992K Wheel Loader and 854K Wheel Dozer Power Train Axle Oil Cooler Pump and Motor
992K Wheel Loader and 854K Wheel Dozer Power Train Control Manifold (Axle Oil Cooler)
992K Wheel Loader and 854K Wheel Dozer Braking System Parking Brake
992K Wheel Loader and 854K Wheel Dozer Braking System Service Brakes
993K Wheel Loader Power Train Transmission Hydraulic Control Operation
992K Wheel Loader and 854K Wheel Dozer Braking System Piston Pump (Brake)
992K Wheel Loader and 854K Wheel Dozer Power Train Output Transfer Gears - Disassemble
994H Wheel Loader Machine Systems Window Wiper and Wiper Motor (Front) - Remove
994H Wheel Loader Machine Systems STIC Control and Pilot Valve (Steering) - Remove
992K Wheel Loader Electrohydraulic System Electrohydraulic Control
992K Wheel Loader and 854K Wheel Dozer Braking System Temperature Sensor (Implement, Hydraulic Fan Oil) (Steering, Brake Oil)
854K Wheel Dozer Hydraulic System Tilt Cylinder (Tilt, Tip Function) - Left Hand, Right Hand
992K Wheel Loader Electrohydraulic System Graphic Color Codes
2007/12/10 Installation of Fuel Injection Pump {1251}
992K Wheel Loader Electrohydraulic System General Information
Instructions for the Field Installation of the 324-8180 Electrohydraulic Control Conversion Gp (Kit, Joystick to 2-Lever Control). and the 324-8181 Electrohydraulic Control Conversion Gp (Kit, Joystick to 3-Lever Control){5063, 5702, 5705} Instructions for the Field Installation of the 324-8180 Electrohydraulic Control Conversion Gp (Kit, Joystick to 2-Lever Control). and the 324-8181 Electrohydraulic Control Conversion Gp (Kit, Joystick to 3-Lever Control){5063, 5702, 5705}
Procedure for Changing a Hydraulic Control Support That Has Three Bearings to a Hydraulic Control Support That Has Four Bearings{5258} Procedure for Changing a Hydraulic Control Support That Has Three Bearings to a Hydraulic Control Support That Has Four Bearings{5258}
994F Wheel Loader Power Train Diagnostic Capabilities
Systems Operation Manual for the Axle Oil Cooler for the 990H Wheel Loader and the 844H Wheel Dozer{1365, 7620} Systems Operation Manual for the Axle Oil Cooler for the 990H Wheel Loader and the 844H Wheel Dozer{1365, 7620}