C15 and C18 Generator Set Engines Caterpillar


Flywheel - Remove

Usage:

C15 115

拆卸步骤

表 1
所需工具    
工具     零件号     零件说明     数量    
A     138-7575     提升支架     2    
B     -     导向螺柱
5/8 - 18 x 8 in    
2    

开始:

  1. 拆下发电机。 请参阅拆解和组装, "发电机 - 拆卸"。


注意

保持所有零件清洁无杂质。

杂质会造成快速磨损和缩短部件寿命。





    图 1g01091639

  1. 将工具 (A) 和适当的起吊设备安装在飞轮 (2) 上。 飞轮 (2) 的重量约为 85 kg (185 lb)。

  1. 拆下两个螺栓 (1) 。 安装工具 (B) 。

  1. 拆下剩余的螺栓 (1) 。 拆下飞轮 (2) 。



    图 2g01091705

  1. 使用锤子和冲头以将齿圈 (3) 从飞轮 (2) 上拆下。

Caterpillar Information System:

C4.4 (Mech) Industrial Engine Cooling System Coolant Level - Check
3512E Petroleum Engines Air Inlet Manifold - Remove and Install
3512B and 3516B Engines Air Inlet Manifold - Remove and Install
C15 and C18 Generator Set Engines Water Temperature Regulator - Remove and Install
C15 and C18 Generator Set Engines Water Pump - Install
C280 Marine and Petroleum Engines Atmospheric Pressure Sensor
3500 Engines Aftercooler - Remove and Install
3500 Spark Ignited Engines Magneto Drive
C9 On-highway Engine Valve Mechanism Cover
3500 Engines Turbocharger - Install
C15 and C18 Generator Set Engines Water Pump - Remove
3500 Engines Turbocharger - Remove
C3.3 Industrial Engine Engine Oil Cooler - Inspect
C15 and C18 Generator Set Engines Flywheel Housing - Remove and Install
2006/02/06 New Kits Are Available to Repair Cracks and Threads in Ductile Iron {0676, 0685}
C280 Marine and Petroleum Engines Boost Pressure Sensor
C13, C15, and C18 Generator Set Engines Sensors and Electrical Connectors
CX28, CX31 and CX35 On-Highway Transmissions Power Train Electronic Control System Transmission, SPN 740 - FMI 5
CX28, CX31 and CX35 On-Highway Transmissions Power Train Electronic Control System Transmission, SPN 740 - FMI 6
CX28, CX31 and CX35 On-Highway Transmissions Power Train Electronic Control System Transmission, SPN 734 - FMI 5
CX28, CX31 and CX35 On-Highway Transmissions Power Train Electronic Control System Transmission, SPN 734 - FMI 6
CX28, CX31 and CX35 On-Highway Transmissions Power Train Electronic Control System Transmission, SPN 735 - FMI 5
CX28, CX31 and CX35 On-Highway Transmissions Power Train Electronic Control System Transmission, SPN 736 - FMI 5
CX28, CX31 and CX35 On-Highway Transmissions Power Train Electronic Control System Transmission, SPN 737 - FMI 5
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.