Water Pump - Install
安装步骤
Show/hide table
| 注意 |
|---|
保持所有零件清洁无杂质。 杂质会造成快速磨损和缩短部件寿命。 |
- 安置水泵 (8) 。 安装螺栓 (7) 。
Show/hide table
 | |
| 图 1 | g01241281 |
- 安装盖 (5) 和螺栓 (6) 。
- 将水泵盖 (4) 安置在水泵 (8) 上并安装螺栓 (9) 。
- 将整体式密封 (10) 安装在机油冷却器底盖 (11) 上。 将机油冷却器底盖 (11) 安置在水泵 (8) 上并安装螺栓 (12) 。
- 连接软管组件 (13) 和软管 (3) 。
- 安置护罩 (1) 和螺栓 (2) 。
Show/hide table
| 图 2 | g01238454 |
End By: 安装水温调节器。 请参阅 拆解和组装, "水温调节器 - 拆卸和安装"。
Caterpillar Information System:
C280 Marine and Petroleum Engines Atmospheric Pressure Sensor
3500 Engines Aftercooler - Remove and Install
3500 Spark Ignited Engines Magneto Drive
C9 On-highway Engine Valve Mechanism Cover
3500 Engines Turbocharger - Install
C15 and C18 Generator Set Engines Water Pump - Remove
3500 Engines Turbocharger - Remove
C15 and C18 Generator Set Engines Engine Oil Pump - Install
CX28, CX31 and CX35 On-Highway Transmissions Power Train Electronic Control System Transmission, SPN 177 - FMI 16
CX28, CX31 and CX35 On-Highway Transmissions Power Train Electronic Control System Transmission, SPN 177 - FMI 4
CX28, CX31 and CX35 On-Highway Transmissions Power Train Electronic Control System Transmission, SPN 177 - FMI 3
3500 Engines Excessive Black Smoke
C15 and C18 Generator Set Engines Water Temperature Regulator - Remove and Install
3512B and 3516B Engines Air Inlet Manifold - Remove and Install
3512E Petroleum Engines Air Inlet Manifold - Remove and Install
C4.4 (Mech) Industrial Engine Cooling System Coolant Level - Check
C15 and C18 Generator Set Engines Flywheel - Remove
C3.3 Industrial Engine Engine Oil Cooler - Inspect
C15 and C18 Generator Set Engines Flywheel Housing - Remove and Install
2006/02/06 New Kits Are Available to Repair Cracks and Threads in Ductile Iron {0676, 0685}
C280 Marine and Petroleum Engines Boost Pressure Sensor
C13, C15, and C18 Generator Set Engines Sensors and Electrical Connectors
CX28, CX31 and CX35 On-Highway Transmissions Power Train Electronic Control System Transmission, SPN 740 - FMI 5
CX28, CX31 and CX35 On-Highway Transmissions Power Train Electronic Control System Transmission, SPN 740 - FMI 6