Valve Mechanism Cover
Show/hide table
Illustration 1 | g01623159 |
Tighten the bolt 1 through bolt 10 in a numerical sequence that is shown in Illustration 1 to standard torque.
(1) Orient the outlet of the breather assembly, as shown. Hand tighten the breather assembly until the seal seats fully on the cover.
Caterpillar Information System:
3500 Engines Turbocharger - Install
C15 and C18 Generator Set Engines Water Pump - Remove
3500 Engines Turbocharger - Remove
C15 and C18 Generator Set Engines Engine Oil Pump - Install
CX28, CX31 and CX35 On-Highway Transmissions Power Train Electronic Control System Transmission, SPN 177 - FMI 16
CX28, CX31 and CX35 On-Highway Transmissions Power Train Electronic Control System Transmission, SPN 177 - FMI 4
CX28, CX31 and CX35 On-Highway Transmissions Power Train Electronic Control System Transmission, SPN 177 - FMI 3
3500 Engines Excessive Black Smoke
CX28, CX31 and CX35 On-Highway Transmissions Power Train Electronic Control System Transmission, SPN 190 - FMI 8
C15 and C18 Generator Set Engines Engine Oil Pump - Remove
CX28, CX31 and CX35 On-Highway Transmissions Power Train Electronic Control System Diagnostic Trouble Code List
G3500 A3 Engines Turbocharger Turbine Temperature (Low)
3500 Spark Ignited Engines Magneto Drive
3500 Engines Aftercooler - Remove and Install
C280 Marine and Petroleum Engines Atmospheric Pressure Sensor
C15 and C18 Generator Set Engines Water Pump - Install
C15 and C18 Generator Set Engines Water Temperature Regulator - Remove and Install
3512B and 3516B Engines Air Inlet Manifold - Remove and Install
3512E Petroleum Engines Air Inlet Manifold - Remove and Install
C4.4 (Mech) Industrial Engine Cooling System Coolant Level - Check
C15 and C18 Generator Set Engines Flywheel - Remove
C3.3 Industrial Engine Engine Oil Cooler - Inspect
C15 and C18 Generator Set Engines Flywheel Housing - Remove and Install
2006/02/06 New Kits Are Available to Repair Cracks and Threads in Ductile Iron {0676, 0685}