Aftercooler - Remove
Show/hide table
Required Tools | |||
Tool | Part Number | Part Description | Qty |
A | 138-7573 | Link Bracket | 1 |
- Remove bracket (1) from aftercooler (3). Disconnect hose (2) from aftercooler (3).
Show/hide table
Illustration 2 g01230888 - Remove bracket (4) from aftercooler (3). Disconnect hose (5) from aftercooler (3).
Show/hide table
Illustration 3 g01230891 - Remove bolts (6) from aftercooler (3).
Show/hide table
Illustration 4 g01230899 - Remove bolt (7) and spacer (8) from aftercooler (3).
Show/hide table
Illustration 5 g01230900 - Remove bolts (9) from aftercooler (3).
Show/hide table
Illustration 6 g01230901 - Remove bolts (10) in order to remove fan guard (11) from aftercooler (3).
Show/hide table
Illustration 7 g01230908 - Attach Tooling (A) and a suitable lifting device onto aftercooler (3). The weight of aftercooler (3) is approximately
54 kg (120 lb) . Remove aftercooler (3).Show/hide tableIllustration 8 g01230911 - Remove bolts (12) from aftercooler (3). Remove cover assembly (13) and the gasket from core assembly (14).
Show/hide table
Illustration 9 g01230912 - Remove bolts (15) in order to remove core assembly (14) and the gasket.
Show/hide table
Illustration 1 | g01230884 |
Caterpillar Information System:
2006/01/02 Improved Starter Relay Available {1426, 4493}
SR5 Electric Power Generation Exciter Field - Flash
325D and 329D Excavators Hydraulic System Pilot Valve (Swing Parking Brake)
C6.6 Engines for Caterpillar Built Machines Exhaust Manifold
C9 Generator Set Engine Engine - Install
SR5 Electric Power Generation Leads - Connect
C9 Generator Set Engine Engine - Remove
CX31 On-Highway Transmission Power Train Control Manifold - Remove
C6.6 Generator Set Engine Speed/Timing Sensor Circuit - Test
3176C and 3196 Engines for Caterpillar Built Machines Flywheel Housing
SR5 Electric Power Generation Generator - Dry
SR5 Electric Power Generation Resistor - Test
C6.6 Generator Set Engine Temperature Sensor Open or Short Circuit - Test
CX31 On-Highway Transmission Power Train Control Manifold - Install
CX31 On-Highway Transmission Power Train Control Manifold - Disassemble
C9 Generator Set Engine Aftercooler - Install
Installation of the 422-9537 Repair Kit {1233} Installation of the 422-9537 Repair Kit {1233}
3126B and 3126E Truck Engines Flywheel
CX31 On-Highway Transmission Power Train Control Manifold - Assemble
2006/10/09 Replacement Idler Gear Assembly {1206, 1207}
C6.6 Generator Set CID 0041 FMI 03
C6.6 Generator Set E360 Low Engine Oil Pressure
C6.6 Generator Set CID 0041 FMI 04
3126B and 3126E Truck Engines Flywheel