Improved Starter Relay Available {1426, 4493}
- Engine:
- 3054 (S/N: CHN1-UP; TCN1-UP)
- 3056 (S/N: SNX1-UP)
Show/hide table
Required Parts     | ||
---|---|---|
Part Number     | Description     | Quantity     |
2L-8066     | Ring Terminal - Insulated     | 2     |
265-5679     | Relay (12 VDC) (1)     | 1     |
277-4221     | Relay (24 VDC) (1)     | 1     |
Show/hide table
( 1 ) | Depending on the machine system, you may require a 12 VDC or a 24 VDC relay. |
An improved relay is now available for Marine machine starting systems. The 180 Amperes 265-5679 Relay and 2L-8066 Ring Terminals replace the 30 Amperes 213-0245 Relay in 12 VDC Marine machine systems. The 80 Amperes 277-4221 Relay and 2L-8066 Ring Terminals replace the 30 Amperes 206-9427 Relay in 24 VDC Marine machine systems.
Show/hide table
Illustration 1 | g01230952 |
(1) 213-3068 Connection Box (2) Relay (12 VDC or 24 VDC) |
Installation of 12 VDC Relay
- Replace the relay with 265-5679 Relay (12 VDC) .
- Cut the spade terminal off wire number "50". Cut the spade terminal off wire number "+".
- Connect the 2L-8066 Ring Terminal to wire number "50". Connect the 2L-8066 Ring Terminal to wire number "+".
- Connect wire "50" to terminal "87" on 265-5679 Relay (12 VDC). Connect wire "+" to terminal 30 on 265-5679 Relay (12 VDC) .
Installation of 24 VDC Relay
- Replace the relay with 277-4221 Relay (24 VDC) .
- Cut the spade terminal off wire number "50". Cut the spade terminal off wire number "+".
Caterpillar Information System:
SR5 Electric Power Generation Exciter Field - Flash
325D and 329D Excavators Hydraulic System Pilot Valve (Swing Parking Brake)
C6.6 Engines for Caterpillar Built Machines Exhaust Manifold
C9 Generator Set Engine Engine - Install
SR5 Electric Power Generation Leads - Connect
C9 Generator Set Engine Engine - Remove
CX31 On-Highway Transmission Power Train Control Manifold - Remove
C6.6 Generator Set Engine Speed/Timing Sensor Circuit - Test
3176C and 3196 Engines for Caterpillar Built Machines Flywheel Housing
SR5 Electric Power Generation Generator - Dry
SR5 Electric Power Generation Resistor - Test
SR5 Electric Power Generation Insulation - Test
C9 Generator Set Engine Aftercooler - Remove
C6.6 Generator Set Engine Temperature Sensor Open or Short Circuit - Test
CX31 On-Highway Transmission Power Train Control Manifold - Install
CX31 On-Highway Transmission Power Train Control Manifold - Disassemble
C9 Generator Set Engine Aftercooler - Install
Installation of the 422-9537 Repair Kit {1233} Installation of the 422-9537 Repair Kit {1233}
3126B and 3126E Truck Engines Flywheel
CX31 On-Highway Transmission Power Train Control Manifold - Assemble
2006/10/09 Replacement Idler Gear Assembly {1206, 1207}
C6.6 Generator Set CID 0041 FMI 03
C6.6 Generator Set E360 Low Engine Oil Pressure
C6.6 Generator Set CID 0041 FMI 04