Engine - Remove
Show/hide table
Required Tools | |||
Tool | Part Number | Part Description | Qty |
A | 6V-3145 | Load Leveling Beam | 1 |
B | 189-0409 | Shackle As | 2 |
Start By:
- Remove the cooling package. Refer to Disassembly and Assembly, "Cooling System Package (Radiator, Aftercooler, Fuel Cooler) - Remove".
- Remove the fan. Refer to Disassembly and Assembly, "Fan - Remove and Install".
- Disconnect harness assembly (1), cable assemblies (2), and harness assembly (3) from electric starting motor (4).
Show/hide table
Illustration 2 g01230782 - Disconnect hose assembly (5).
Show/hide table
Illustration 3 g01230785 - Disconnect harness assembly (6) from electronic control module (7).
Show/hide table
Illustration 4 g01230786 - Disconnect harness assemblies (8) from alternator (9).
Show/hide table
Illustration 5 g01230787 - Use suitable cribbing in order to support generator (10).
Show/hide table
Illustration 6 g01230788 - Remove screen assembly (11) from generator (10).
Show/hide table
Illustration 7 g01230790 - Remove bolts (12) and bolts (13) from generator (10).
Show/hide table
Illustration 8 g01230791 - Attach Tooling (B) onto engine (14). Attach Tooling (A) onto Tooling (B). The weight of engine (14) is approximately
1361 kg (3000 lb) .Show/hide tableIllustration 9 g01230793 - Remove bolts (15). Repeat for the opposite side. Remove engine (14).
Show/hide table
Illustration 1 | g01230781 |
Caterpillar Information System:
CX31 On-Highway Transmission Power Train Control Manifold - Remove
C6.6 Generator Set Engine Speed/Timing Sensor Circuit - Test
3176C and 3196 Engines for Caterpillar Built Machines Flywheel Housing
SR5 Electric Power Generation Generator - Dry
SR5 Electric Power Generation Resistor - Test
SR5 Electric Power Generation Insulation - Test
SR5 Electric Power Generation Winding - Test
3126B and 3126E Truck Engines Gear Group (Front)
C9 On-highway Engines Model View Illustrations
Installation of New Hose Assembly for Unit Injector Hydraulic Pump{1274, 1307, 1714} Installation of New Hose Assembly for Unit Injector Hydraulic Pump{1274, 1307, 1714}
C9 Generator Set Engine Fan - Remove and Install
SR5 Electric Power Generation Rotating Rectifier - Test
SR5 Electric Power Generation Leads - Connect
C9 Generator Set Engine Engine - Install
C6.6 Engines for Caterpillar Built Machines Exhaust Manifold
325D and 329D Excavators Hydraulic System Pilot Valve (Swing Parking Brake)
SR5 Electric Power Generation Exciter Field - Flash
2006/01/02 Improved Starter Relay Available {1426, 4493}
C9 Generator Set Engine Aftercooler - Remove
C6.6 Generator Set Engine Temperature Sensor Open or Short Circuit - Test
CX31 On-Highway Transmission Power Train Control Manifold - Install
CX31 On-Highway Transmission Power Train Control Manifold - Disassemble
C9 Generator Set Engine Aftercooler - Install
Installation of the 422-9537 Repair Kit {1233} Installation of the 422-9537 Repair Kit {1233}