Fan - Remove and Install
Start By:
- Remove the cooling package. Refer to Disassembly and Assembly, "Cooling System Package (Radiator, Aftercooler, Fuel Cooler) - Remove".
- Remove bolts (1). Remove cooling fan (2).
Show/hide table
Illustration 1 | g01230618 |
- Install cooling fan (2). Install bolts (1).
Show/hide table
Illustration 2 | g01230618 |
End By:
- Install the cooling package. Refer to Disassembly and Assembly, "Cooling System Package (Radiator, Aftercooler, Fuel Cooler) - Install".
Caterpillar Information System:
SR5 Electric Power Generation Rotating Rectifier - Test
SR5 Electric Power Generation Varistor - Test
C9 Generator Set Engine Radiator Core - Remove and Install
Electrical Application and Installation Guide for Petroleum Transmissions and Petroleum Power Train Packages{1408, 1435, 3030, 7490, 7553} Electrical Application and Installation Guide for Petroleum Transmissions and Petroleum Power Train Packages{1408, 1435, 3030, 7490, 7553}
C9 Generator Set Engine Radiator Top Tank - Remove and Install
336E Excavator Machine System Specifications Stick Cylinder Lines
3126B and 3126E Truck Engines Front Housing and Covers
SR5 Electric Power Generation Generator Set - Test
SR5 Electric Power Generation Troubleshooting
SR5 Electric Power Generation Service Tools
SR5 Electric Power Generation General Information
SR5 Electric Power Generation Glossary
Installation of New Hose Assembly for Unit Injector Hydraulic Pump{1274, 1307, 1714} Installation of New Hose Assembly for Unit Injector Hydraulic Pump{1274, 1307, 1714}
C9 On-highway Engines Model View Illustrations
3126B and 3126E Truck Engines Gear Group (Front)
SR5 Electric Power Generation Winding - Test
SR5 Electric Power Generation Insulation - Test
SR5 Electric Power Generation Resistor - Test
SR5 Electric Power Generation Generator - Dry
3176C and 3196 Engines for Caterpillar Built Machines Flywheel Housing
C6.6 Generator Set Engine Speed/Timing Sensor Circuit - Test
CX31 On-Highway Transmission Power Train Control Manifold - Remove
C9 Generator Set Engine Engine - Remove
SR5 Electric Power Generation Leads - Connect