Front Housing and Covers
Show/hide table
 | |
| Illustration 1 | g01116434 |
Show/hide table
 | |
| Illustration 2 | g01230505 |
Apply 8C-8422 Sealant to the front housing sealing surfaces before assembling the front housing to the cylinder block. The front housing must be assembled and tightened to the cylinder block within ten minutes.
(1) Cylinder Block
(2) Front housing
(3) Bolts (X) ... 50.0 mm (1.97 inch)
(4) Bolts (Y) ... 20.0 mm (0.79 inch)
(5) Front housing cover
(6) Apply 9S-3263 Thread Lock Compound to the serrations of the studs before installation.
Caterpillar Information System:
SR5 Electric Power Generation Generator Set - Test
SR5 Electric Power Generation Troubleshooting
SR5 Electric Power Generation Service Tools
SR5 Electric Power Generation General Information
SR5 Electric Power Generation Glossary
SR5 Electric Power Generation Lead Connections
SR5 Electric Power Generation Generator Operation
SR5 Electric Power Generation Component Descriptions
SR5 Electric Power Generation General Information
C6.6 Generator Set 5 Volt Sensor Supply Circuit - Test
C6.6 Generator Set E362 Engine Overspeed
C6.6 Generator Set CID 0261 FMI 11
336E Excavator Machine System Specifications Stick Cylinder Lines
C9 Generator Set Engine Radiator Top Tank - Remove and Install
Electrical Application and Installation Guide for Petroleum Transmissions and Petroleum Power Train Packages{1408, 1435, 3030, 7490, 7553} Electrical Application and Installation Guide for Petroleum Transmissions and Petroleum Power Train Packages{1408, 1435, 3030, 7490, 7553}
C9 Generator Set Engine Radiator Core - Remove and Install
SR5 Electric Power Generation Varistor - Test
SR5 Electric Power Generation Rotating Rectifier - Test
C9 Generator Set Engine Fan - Remove and Install
Installation of New Hose Assembly for Unit Injector Hydraulic Pump{1274, 1307, 1714} Installation of New Hose Assembly for Unit Injector Hydraulic Pump{1274, 1307, 1714}
C9 On-highway Engines Model View Illustrations
3126B and 3126E Truck Engines Gear Group (Front)
SR5 Electric Power Generation Winding - Test
SR5 Electric Power Generation Insulation - Test