1985/05/06 Caterpillar


New Battery Cable Crimping Die Available{0600}

Usage:


The new 8T3046 Crimping Die is available for use in the 5S2801 Hydraulic Press Group. The 8T3046 Crimping Die can be used to install the terminals on 1/0, 2/0 , 3/0 and 4/0 cable sizes. The die is designed so that the terminal and cable receive the correct amount of compression when the die halves are fully closed. Special Instruction SMHS8281 gives additional information on use of the 8T3046 Crimping Die.


8T3046 Crimping Die.

Caterpillar Information System:

1985/05/06 Exhaust Manifolds Now Use Locks And High Temp Bolts{1050,1059}
1985/04/29 Visual Inspection Can Detect Chrome Plated Engine Valves{1105}
1985/04/29 Special Pricing On Metric Hand Tools For U.S. And Canada Only{0600,0601,0602}
1985/04/29 Extended Oil And Oil Filter Change Intervals{1300,1318}
1985/04/29 Installing New Copper Bonded Bearings Can Extend Engine Life{1230,1203,1219}
1985/04/22 New Ring (Seal) Used In Clutch Piston{3354}
1985/04/22 FT1953 Gauge For Track Assembly{0600,0760}
1985/04/22 Correct Installation Of Oil Sequence Valves{1304}
1985/04/22 New Camshafts Used In SAE Standard [CCW] Rotation Engines{1200,1210}
1985/04/08 Constant Torque Hose Clamps Available For General Use{7550,7553}
1985/04/08 Track Group Shipping Clamps Are Available Through The Parts Distribution System{4170}
1985/04/08 Make Sure Air Cylinder For Governor Actuation Is Correctly Adjusted{1269}
1985/05/06 New Bearing Housings Available For Turbochargers{1052,1053,1056}
1985/05/06 System To Find Internal Fuel Leakage{1250}
1985/05/06 New Governor Drive Group Has Longer Service Life{1289,1264}
1985/05/06 New Clamp Added To Right Hand Instrument Panel Fuel Filter Differential Lines Group{7451,7456,7450}
1985/05/06 Be Sure Correct Piston Rings Are Used On 3400 Series Engines{1215,1214}
1985/05/06 Remanufactured Fuel Ratio Controls Are Available In U.S. And Canada{1278,7754}
1985/05/13 Hydramechanical Governor Fuel Setting Information{1289,1250}
1985/05/13 New Oil Pressure And Water Temperature Alarm Contactor Group Used{7400,7407,7417}
1985/05/13 Improved Remote Shutoff Group Has New Pressure Control Group{1050,1078,1085}
1985/05/13 Check For Interference Between Water Temperature Regulator And Cylinder Head Bore{1355}
1985/05/20 Incorrect Air Compressor Installation Can Cause An Early Failure{1800,1803,1804}
1985/05/20 Air Conditioner Compressor Mounting Bracket Improved{1802}
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.