FT1953 Gauge For Track Assembly{0600,0760}
Usage:
A dial indicator gauge is available as a fabricated tool for use in track assembly. This FT1953 Gauge can be used to measure both pin and bushing projection on track assemblies.
FT1953 Gauge being used to check pin projection.
Dealers in the U.S.A. and Caterpillar Americas can order drawings of Fabricated Tools (FT) from the address that follows. All other dealers can order drawings from their Subsidiary Service Departments.
Service Pubs. Print Room
Pioneer Park
600 W. Washington St.
East Peoria, IL 61630
Phone: 309-675-0515
Caterpillar Information System:
1985/04/22 Correct Installation Of Oil Sequence Valves{1304}
1985/04/22 New Camshafts Used In SAE Standard [CCW] Rotation Engines{1200,1210}
1985/04/08 Constant Torque Hose Clamps Available For General Use{7550,7553}
1985/04/08 Track Group Shipping Clamps Are Available Through The Parts Distribution System{4170}
1985/04/08 Make Sure Air Cylinder For Governor Actuation Is Correctly Adjusted{1269}
1985/04/08 Hardened Spacers Help Keep Bolts Tight{1063}
1985/04/08 Changes To Naturally Aspirated Truck Engines For 1985{1000,1200,1214,1218,1250,1251,1254}
1985/04/08 Crankcase Explosion Relief Valve Kit Available{1200,1233}
1985/04/08 New Outer Governor Spring And Torque Control Pin Used In Governor And Pump Groups{1264}
1985/04/08 Additional Zinc Rods Improve Service Life Of Sea Water Heat Exchanger{1379}
1985/04/08 Several Types Of Automatic Voltage Regulators (AVR) Used In SR4 Generators{4450}
1985/04/08 Differential Oil Pressure Gauge For Oil Filter Shows High Differential Pressure{1300,1306,1315}
1985/04/22 New Ring (Seal) Used In Clutch Piston{3354}
1985/04/29 Installing New Copper Bonded Bearings Can Extend Engine Life{1230,1203,1219}
1985/04/29 Extended Oil And Oil Filter Change Intervals{1300,1318}
1985/04/29 Special Pricing On Metric Hand Tools For U.S. And Canada Only{0600,0601,0602}
1985/04/29 Visual Inspection Can Detect Chrome Plated Engine Valves{1105}
1985/05/06 Exhaust Manifolds Now Use Locks And High Temp Bolts{1050,1059}
1985/05/06 New Battery Cable Crimping Die Available{0600}
1985/05/06 New Bearing Housings Available For Turbochargers{1052,1053,1056}
1985/05/06 System To Find Internal Fuel Leakage{1250}
1985/05/06 New Governor Drive Group Has Longer Service Life{1289,1264}
1985/05/06 New Clamp Added To Right Hand Instrument Panel Fuel Filter Differential Lines Group{7451,7456,7450}
1985/05/06 Be Sure Correct Piston Rings Are Used On 3400 Series Engines{1215,1214}