1985/04/22 Caterpillar


New Ring (Seal) Used In Clutch Piston{3354}

Usage:


MG507 Marine Transmissions

Description of Change: A new ring (seal) is used in the clutch piston of Twin Disc MG507 Marine Transmissions. The new ring is a different size than the former case gasket (seal) and will improve the operation and service life of the transmission clutch piston.

Adaptable As: The new 7T8746 Lathe Cut Ring (seal) is a direct replacement for the former 5B5973 Case Gasket used in 3T2376, 3T2377, 3T2378, 3T2379, 3T2380, 6T7910, 6T7911 and 6T7912 Gear Groups used in MG507 Marine Transmissions.

Caterpillar Information System:

1985/04/22 FT1953 Gauge For Track Assembly{0600,0760}
1985/04/22 Correct Installation Of Oil Sequence Valves{1304}
1985/04/22 New Camshafts Used In SAE Standard [CCW] Rotation Engines{1200,1210}
1985/04/08 Constant Torque Hose Clamps Available For General Use{7550,7553}
1985/04/08 Track Group Shipping Clamps Are Available Through The Parts Distribution System{4170}
1985/04/08 Make Sure Air Cylinder For Governor Actuation Is Correctly Adjusted{1269}
1985/04/08 Hardened Spacers Help Keep Bolts Tight{1063}
1985/04/08 Changes To Naturally Aspirated Truck Engines For 1985{1000,1200,1214,1218,1250,1251,1254}
1985/04/08 Crankcase Explosion Relief Valve Kit Available{1200,1233}
1985/04/08 New Outer Governor Spring And Torque Control Pin Used In Governor And Pump Groups{1264}
1985/04/08 Additional Zinc Rods Improve Service Life Of Sea Water Heat Exchanger{1379}
1985/04/08 Several Types Of Automatic Voltage Regulators (AVR) Used In SR4 Generators{4450}
1985/04/29 Installing New Copper Bonded Bearings Can Extend Engine Life{1230,1203,1219}
1985/04/29 Extended Oil And Oil Filter Change Intervals{1300,1318}
1985/04/29 Special Pricing On Metric Hand Tools For U.S. And Canada Only{0600,0601,0602}
1985/04/29 Visual Inspection Can Detect Chrome Plated Engine Valves{1105}
1985/05/06 Exhaust Manifolds Now Use Locks And High Temp Bolts{1050,1059}
1985/05/06 New Battery Cable Crimping Die Available{0600}
1985/05/06 New Bearing Housings Available For Turbochargers{1052,1053,1056}
1985/05/06 System To Find Internal Fuel Leakage{1250}
1985/05/06 New Governor Drive Group Has Longer Service Life{1289,1264}
1985/05/06 New Clamp Added To Right Hand Instrument Panel Fuel Filter Differential Lines Group{7451,7456,7450}
1985/05/06 Be Sure Correct Piston Rings Are Used On 3400 Series Engines{1215,1214}
1985/05/06 Remanufactured Fuel Ratio Controls Are Available In U.S. And Canada{1278,7754}
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.