C27 and C32 Engines for Caterpillar Built Machines Caterpillar


CID 1796 FMI 04 Intake Manifold #2 Air Temperature Sensor voltage below normal

Usage:

854K 221
Kondisi-kondisi yang mendorong penciptaan kode ini:

Tegangan sinyal dari sensor temperatur udara intake manifold berada di bawah normal atau temperatur udara intake manifold di atas 140 °C (284 °F).

Tanggapan:

Modul Kontrol Elektronik (ECM, Electronic Control Module) akan mencatat kode diagnostik. ECM akan memberi tanda pada temperatur udara intake manifold sebagai data yang tidak valid dan nilai default digunakan.

Kemungkinan Akibat Perlaksanaan:

  • Tidak ada efek pada kinerja.

Pemecahan Masalah:

Langkah Pengujian" status="1 1. Laksanakan, Prosedur Pemeriksaan berikut: "Sirkuit Terbuka atau Hubung-Singkat pada Sensor Temperatur Engine - Pengujian"

Hasil:

  • OK - BERHENTI

Caterpillar Information System:

C27 and C32 Engines for Caterpillar Built Machines CID 1796 FMI 03 Intake Manifold #2 Air Temperature Sensor voltage above normal
C27 and C32 Engines for Caterpillar Built Machines CID 1795 FMI 10 Turbo #2 Outlet Pressure Sensor abnormal rate of change
C27 and C32 Engines for Caterpillar Built Machines CID 1795 FMI 04 Turbo #2 Outlet Pressure Sensor voltage below normal
C27 and C32 Engines for Caterpillar Built Machines CID 1795 FMI 03 Turbo #2 Outlet Pressure Sensor voltage above normal
2006/03/27 A New Winch Control Is Now Available {5163, 5705}
814F Series 2 Wheel Dozer, 815F Series 2 Soil Compactor and 816F Series 2 Landfill Compactor Steering System Pressure Reducing Valve (Implement Pilot) (Steering Pilot)
D6T Track-Type Tractor Machine Systems Hydraulic Control Valve - Disassemble
2006/04/10 Apply Retaining Compound Prior to Installing the Torque Converter Transfer Gear Retaining Bolt {3101, 3159}
2009/09/28 Correction to Disassembly and Assembly , "Torque Converter Updrive Gears - Assemble" {3105, 3159}
2006/04/10 Correction to Specifications , "Torque Converter and Updrive" {3101, 3159}
993K Wheel Loader Transmission Oil - Change
D7R Series II Track-Type Tractor Machine Systems Tilt Cylinder (Bulldozer) - Remove and Install
D3K, D4K and D5K Track-Type Tractors Specifications
Bench Test Procedure For A D10T Track-Type Tractor Transmission{3030, 3073} Bench Test Procedure For A D10T Track-Type Tractor Transmission{3030, 3073}
D3K, D4K and D5K Track-Type Tractors Operator Controls
993K Wheel Loader Differential and Final Drive Oil Level - Check
993K Wheel Loader Differential and Final Drive Oil - Change
993K Wheel Loader Differential and Final Drive Oil Sample - Obtain
854K Wheel Dozer Rollover Protective Structure (ROPS) - Inspect
Bench Test Procedure For A 613 And 613B Wheel Tractor-Scraper Transmission {3030, 3073} Bench Test Procedure For A 613 And 613B Wheel Tractor-Scraper Transmission {3030, 3073}
D7R Series II Track-Type Tractor Engine Supplement Alternator - Remove and Install
Air Conditioning and Heating R134a for All Caterpillar Machines Identifying the Air Conditioning System
D7R Series II Track-Type Tractor Engine Supplement Fuel Priming Pump - Remove and Install
993K Wheel Loader Radiator Core - Clean
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.