A Thicker Cover is Now Used on the Pivot Shaft Seal {4153}
- Track-Type Loader:
- 953C (S/N: 2ZN1-UP; BBX1-UP)
Description of Change: A new cover is used in the pivot bar group. The new cover is thicker. The thicker cover is stronger and more reliable. Longer bolts are now used to hold the thicker plate in place.
Show/hide table
 | |
| Illustration 1 | g01223802 |
Pivot bar group (1) 255-1171 Cover (2) 8T-4183 Bolts | |
Adaptable To: 255-1171 Cover (1) is now used in the place of the 5G-9674 Cover .
Note: Four 8T-4183 Bolts (2) are now used. The new bolts are longer. When the thicker 255-1171 Cover (1) is installed, four 8T-4183 Bolts (2) must be used in order to properly hold the new cover in place.The new cover and longer bolts are effective with 953C (S/N: BBX1084-UP).
The new cover and longer bolts are adaptable to 953C (S/N: 2ZN1-UP; BBX1-1083).
Caterpillar Information System:
525C, 535C and 545C Wheel Skidders Hydraulic and Steering System Control Manifold (Pilot, Differential Lock)
C7 and C9 Engines for Caterpillar Built Machines Variable Pitch Engine Fan Circuit - Test
D6T Track-Type Tractor Systems Power Train Oil Pump
D10T Track-Type Tractor Engine Supplement Radiator Guard - Tilt
525C, 535C and 545C Wheel Skidders Hydraulic and Steering System Control Valve (Decking Blade)
980H Wheel Loader Braking System Brake Accumulator
525C, 535C and 545C Wheel Skidders Hydraulic and Steering System Bank Valve (Decking Blade) (Steering)
980H Wheel Loader Power Train Limited Slip Differential
525C, 535C and 545C Wheel Skidders Hydraulic and Steering System Secondary Steering System
525C, 535C and 545C Wheel Skidders Hydraulic and Steering System Pilot Oil Accumulator (Dead Engine Lower)
C7 and C9 Engines for Caterpillar Built Machines Digital Sensor Supply Circuit - Test
525C, 535C and 545C Wheel Skidders Hydraulic and Steering System Gear Pump (Pilot)
C7 and C9 Engines for Caterpillar Built Machines System Configuration Parameters
2005/11/28 The Capacity For The Primary Fuel Filter Has Been Increased {1260}
2005/11/21 The Hydraulic Return Lines for the Cushion-Hitch Have Been Improved {5057, 5304}
D10T Track-Type Tractor Engine Supplement Radiator Guard - Tilt Back
525C, 535C and 545C Wheel Skidders Power Train Torque Converter Stall - Test
D11T Track-Type Tractor Engine Supplement Refrigerant Condenser - Remove and Install
D6T Track-Type Tractor Power Train Transmission Hydraulic Control
990H Wheel Loader Hydraulic System Hydraulic System Troubleshooting
D6R Series III Track-Type Tractor General Information
2006/08/14 New Software Available for Payload Control System (PCS) {7494, 7620}
Load Haul Dump Machine Machining & Welding Information Preheat, Interpass and Heat Input
D7R Series 2 Track-Type Tractor Power Train Transmission