2005/12/12 Caterpillar


Improved Engine Dipsticks are Now Used {1326}

Usage:

C18 C1J
Marine Engines:
C18 (S/N: CKH1-UP; C1J1-UP; CYN1-UP)

Description of Change:

Note: Engines that contain a 245-9806 Oil Level Gauge Gp (Dipstick) or 241-1724 Oil Level Gauge Gp (Dipstick) do not need to be improved.The C18 engines that are affected contain dipsticks on the left hand side of the engine. These dipsticks have been improved due to interference between the dipstick and the guide for the dipstick.

The engines (S/N: CKH1-1879), (S/N: C1J1-451), and (S/N: CYN1-331) contain 1N-3810 Oil Level Gauge Guide and 203-1887 Oil Level Gauge Gp (Dipstick) .

Adaptable To: The 1N-3810 Oil Level Gauge Guide has been replaced with 273-7188 Oil Level Guide Tube Assembly. The 203-1887 Oil Level Gauge Gp (Dipstick) has been replaced with 273-7187 Oil Level Gauge Gp (Dipstick). These improved Oil Level Gauge Guide Tube Assembly and Oil Level Gauge Gp (Dipstick) are being used in production since 28September 2005.

Caterpillar Information System:

Hydraulic Gear Pumps Used in Transmissions {3066, 5073} Hydraulic Gear Pumps Used in Transmissions {3066, 5073}
C7 Engine for 584 and 584HD Forwarders and for 525C, 535C, and 545C Wheel Skidders CID 0091 FMI 08 Throttle Position signal abnormal
C27 and C32 Generator Set Engines Gear Group (Rear) - Remove
TH48-E80 Petroleum Transmission Power Train Electrical System
C27 and C32 Generator Set Engines Water Temperature Regulator Housing - Remove and Install
C15 and C18 Industrial Engines Fuel Filter and Water Separator
320D Excavator Machine Systems Swing Gear and Bearing - Install
C27 and C32 Generator Set Engines Water Pump - Install
C27 and C32 Generator Set Engines Water Pump - Remove
C15 and C18 Industrial Engines Fuel Filter Base
C11 and C13 Engines Electric Starting Motor
C11 and C13 Engines Alternator and Regulator
C11 and C13 Industrial Engines Monitoring System
C7 Urban Transit Bus Engines Engine Oil Level - Check
325D and 329D Excavators and 325D Material Handler Machine System Specifications Track Roller (Single Flange)
C175 Generator Set Engines Flywheel Housing - Remove
CX38-P892 Well Servicing Transmission Crushing Prevention and Cutting Prevention
CX38-P892 Well Servicing Transmission Fire Prevention and Explosion Prevention
345C MHPU Mobile Hydraulic Power Unit Engine Supplement Engine Oil Filter Base - Remove
345C MHPU Mobile Hydraulic Power Unit Engine Supplement Engine Oil Filter Base - Install
CX35 On-Highway Transmission Magnetic Screen (Transmission) - Clean
3512C and 3516C Engines Diagnostic Code List
3512C and 3516C Engines Event Code List
CX38-P892 Well Servicing Transmission Electrical Storm Injury Prevention
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.