Water Pump - Remove
拆卸步骤
Show/hide table
注意 |
---|
在检验、保养、测试、调整及维修发动机时,请小心确保盛接流出的液体。 在打开或拆解任何储有液体的部件之前,要准备好合适的容器收集液体。 有关适合收集和盛接卡特彼勒产品上的液体的工具和供应品,请参阅专门出版物, NENG2500, "卡特彼勒代理商工具目录"。 按照本地法规和条例处置所有液体。 |
Show/hide table
注意 |
---|
保持所有零件清洁无杂质。 杂质会造成快速磨损和缩短部件寿命。 |
- 从冷却系统将冷却液排入合适的容器以便保存或废弃这些冷却液。 请参阅操作和保养手册, "冷却系统冷却液 - 更换"。
- 拆下螺栓 (1) 和螺栓 (2) 。
Show/hide table
图 1 | g01219274 |
- 拆下盖 (3) 。
- 卸下螺栓 (6) 和螺母 (5) 。
Show/hide table
图 2 | g01219275 |
- 拆下水泵 (4) 。
Caterpillar Information System:
C15 and C18 Industrial Engines Fuel Filter Base
C11 and C13 Engines Electric Starting Motor
C11 and C13 Engines Alternator and Regulator
C13 and C15 On-highway Engines Idle Speed Is High
C27 and C32 Generator Set Engines Engine Oil Pump - Install
3500 Engines Customer Parameters Worksheet
C27 and C32 Generator Set Engines Engine Oil Pump - Assemble
3500 Engines Electrical Connectors and Functions
C27 and C32 Generator Set Engines Engine Oil Pump - Disassemble
C175 Generator Set Engines Fuel Filter Housing - Install
Caterpillar On-Highway Diesel Engine Fluids Recommendations Lubricant Viscosities
C9.3 Engine for Caterpillar Built Machines Air Inlet Heater
C27 and C32 Generator Set Engines Water Pump - Install
320D Excavator Machine Systems Swing Gear and Bearing - Install
C15 and C18 Industrial Engines Fuel Filter and Water Separator
C27 and C32 Generator Set Engines Water Temperature Regulator Housing - Remove and Install
TH48-E80 Petroleum Transmission Power Train Electrical System
C27 and C32 Generator Set Engines Gear Group (Rear) - Remove
C7 Engine for 584 and 584HD Forwarders and for 525C, 535C, and 545C Wheel Skidders CID 0091 FMI 08 Throttle Position signal abnormal
Hydraulic Gear Pumps Used in Transmissions {3066, 5073} Hydraulic Gear Pumps Used in Transmissions {3066, 5073}
2005/12/12 Improved Engine Dipsticks are Now Used {1326}
C11 and C13 Industrial Engines Monitoring System
C7 Urban Transit Bus Engines Engine Oil Level - Check
325D and 329D Excavators and 325D Material Handler Machine System Specifications Track Roller (Single Flange)