Engine Oil Filter Base - Install
安装步骤
Show/hide table
| 注意 |
|---|
保持所有零件清洁无杂质。 杂质会造成快速磨损和缩短部件寿命。 |
- 将机油滤清器底座 (4) 和密封垫定位在发动机上。
Show/hide table
 | |
| 图 1 | g01219814 |
- 安装螺栓 (2) 和 (5) 。
- 安装螺栓 (9) 以连接管 (6) 。
- 连接软管组件 (3) 、 (7) 和 (8) 。
- 安装防护罩 (1) 。
Show/hide table
 | |
| 图 2 | g01184249 |
Caterpillar Information System:
345C MHPU Mobile Hydraulic Power Unit Engine Supplement Engine Oil Filter Base - Remove
CX38-P892 Well Servicing Transmission Fire Prevention and Explosion Prevention
CX38-P892 Well Servicing Transmission Crushing Prevention and Cutting Prevention
C175 Generator Set Engines Flywheel Housing - Remove
325D and 329D Excavators and 325D Material Handler Machine System Specifications Track Roller (Single Flange)
C7 Urban Transit Bus Engines Engine Oil Level - Check
C11 and C13 Industrial Engines Monitoring System
2005/12/12 Improved Engine Dipsticks are Now Used {1326}
Hydraulic Gear Pumps Used in Transmissions {3066, 5073} Hydraulic Gear Pumps Used in Transmissions {3066, 5073}
C7 Engine for 584 and 584HD Forwarders and for 525C, 535C, and 545C Wheel Skidders CID 0091 FMI 08 Throttle Position signal abnormal
C27 and C32 Generator Set Engines Gear Group (Rear) - Remove
TH48-E80 Petroleum Transmission Power Train Electrical System
CX35 On-Highway Transmission Magnetic Screen (Transmission) - Clean
3512C and 3516C Engines Diagnostic Code List
3512C and 3516C Engines Event Code List
CX38-P892 Well Servicing Transmission Electrical Storm Injury Prevention
TH31-E61 and TH35-E81 Petroleum Transmissions Specifications
C11 and C13 Engines Flywheel
C11 and C13 Engines Flywheel
2005/11/21 Improved Joint Assemblies and Seals are Used for the Fuel Lines Group {1274}
345C Excavator and 345C MHPU Mobile Hydraulic Power Unit Machine Systems Travel Motor - Assemble
C15 Industrial Engine Sensors and Electrical Connectors
C27 and C32 Generator Set Engines Gear Group (Rear) - Install
C15 and C18 Industrial Engines Engine Oil Pan