Specifications
Show/hide table
| |
| 图 1 | g02161133 |
字样。
Show/hide table
| TH31 石油变速箱 | ||
| 近似重量 | |
|
| 总高 (A) | |
|
| 总宽 (B) | |
|
| 总长 (C) | |
|
| 动力传动系的长度 (D)(1) | |
|
| 至曲轴安装件的长度 (E) | C9 - C13 | |
Show/hide table
| (1) | 所示长度包含了一个标准 1710 轭。 对于 1810 配对法兰选项，从长度 (D) 减去 |
Show/hide table
| |
| 图 2 | g02161140 |
Show/hide table
| TH31 石油变速箱，带分动箱 | ||
| 近似重量 | |
|
| 总高 (A) | |
|
| 总宽 (B) | |
|
| 总长 (C) | |
|
| 动力传动系的长度 (D)(1) | |
|
| 至曲轴安装件的长度 (E) | C9 - C13 | |
Show/hide table
| (1) | 所示长度包含了一个标准 1710 轭。 对于 1810 配对法兰选项，从长度 (D) 减去 |
Show/hide table
| |
| 图 3 | g02161137 |
Show/hide table
| TH35 石油变速箱 | ||
| 近似重量 | |
|
| 总高 (A) | |
|
| 总宽 (B) | |
|
| 总长 (C) | C9 - C13 | |
| C15 | |
|
| 动力传动系的长度 (D)(1) | |
|
| 至曲轴安装件的长度 (E) | C9 - C13 | |
| C15 | |
|
Show/hide table
| (1) | 所示长度包含了一个标准 1810 轭。 对于 1810 配对法兰选项，从长度 (D) 减去 |
Show/hide table
| |
| 图 4 | g02161138 |
Show/hide table
| TH35 石油变速箱，带分动箱 | ||
| 近似重量 | |
|
| 总高 (A) | |
|
| 总宽 (B) | |
|
| 总长 (C) | C9 - C13 | |
| C15 | |
|
| 动力传动系的长度 (D)(1) | |
|
| 至曲轴安装件的长度 (E) | C9 - C13 | |
| C15 | |
|
Show/hide table
| (1) | 所示长度包含了一个标准 1810 轭。 对于 1810 配对法兰选项，从长度 (D) 减去 |
Caterpillar Information System:
CX38-P892 Well Servicing Transmission Electrical Storm Injury Prevention
3512C and 3516C Engines Event Code List
3512C and 3516C Engines Diagnostic Code List
CX35 On-Highway Transmission Magnetic Screen (Transmission) - Clean
345C MHPU Mobile Hydraulic Power Unit Engine Supplement Engine Oil Filter Base - Install
345C MHPU Mobile Hydraulic Power Unit Engine Supplement Engine Oil Filter Base - Remove
CX38-P892 Well Servicing Transmission Fire Prevention and Explosion Prevention
CX38-P892 Well Servicing Transmission Crushing Prevention and Cutting Prevention
C175 Generator Set Engines Flywheel Housing - Remove
325D and 329D Excavators and 325D Material Handler Machine System Specifications Track Roller (Single Flange)
C7 Urban Transit Bus Engines Engine Oil Level - Check
C11 and C13 Industrial Engines Monitoring System
C11 and C13 Engines Flywheel
C11 and C13 Engines Flywheel
2005/11/21 Improved Joint Assemblies and Seals are Used for the Fuel Lines Group {1274}
345C Excavator and 345C MHPU Mobile Hydraulic Power Unit Machine Systems Travel Motor - Assemble
C15 Industrial Engine Sensors and Electrical Connectors
C27 and C32 Generator Set Engines Gear Group (Rear) - Install
C15 and C18 Industrial Engines Engine Oil Pan
Inspecting the Turbocharger for Exhaust Leaks{1052} Inspecting the Turbocharger for Exhaust Leaks{1052}
C7 Urban Transit Bus Engines Exhaust Particulate Filter Indicator - Check - Diesel Particulate Filter (DPF) Diagnostic Module
320D and 323D Excavators Machine System Specifications Front Lines
C27 and C32 Generator Set Engines Flywheel - Remove and Install
C15 and C18 Petroleum Engines Engine Oil Pan