Engine Oil Filter Base - Remove
拆卸步骤
Show/hide table
| 注意 |
|---|
保持所有零件清洁无杂质。 杂质会造成快速磨损和缩短部件寿命。 |
Show/hide table
| 注意 |
|---|
在检验、保养、测试、调整及维修发动机时，请小心确保盛接流出的液体。 在打开或拆解任何储有液体的部件之前，要准备好合适的容器收集液体。 有关适合收集和盛接卡特彼勒产品上的液体的工具和供应品，请参阅专门出版物, NENG2500, "卡特彼勒代理商工具目录"。 按照本地法规和条例处置所有液体。 |
- 拆下护罩 (1) ，以便进入到发动机。
Show/hide table
 | |
| 图 1 | g01184249 |
- 断开软管组件 (3) 、 (7) 和 (8) 。
Show/hide table
 | |
| 图 2 | g01219814 |
- 拆下螺栓 (9) 以断开管 (6) 。
- 拆卸螺栓 (2) 和 (5) 。
- 拆下发动机机油滤清器底座 (4) 和密封垫。
Caterpillar Information System:
CX38-P892 Well Servicing Transmission Fire Prevention and Explosion Prevention
CX38-P892 Well Servicing Transmission Crushing Prevention and Cutting Prevention
C175 Generator Set Engines Flywheel Housing - Remove
325D and 329D Excavators and 325D Material Handler Machine System Specifications Track Roller (Single Flange)
C7 Urban Transit Bus Engines Engine Oil Level - Check
C11 and C13 Industrial Engines Monitoring System
2005/12/12 Improved Engine Dipsticks are Now Used {1326}
Hydraulic Gear Pumps Used in Transmissions {3066, 5073} Hydraulic Gear Pumps Used in Transmissions {3066, 5073}
C7 Engine for 584 and 584HD Forwarders and for 525C, 535C, and 545C Wheel Skidders CID 0091 FMI 08 Throttle Position signal abnormal
C27 and C32 Generator Set Engines Gear Group (Rear) - Remove
TH48-E80 Petroleum Transmission Power Train Electrical System
C27 and C32 Generator Set Engines Water Temperature Regulator Housing - Remove and Install
345C MHPU Mobile Hydraulic Power Unit Engine Supplement Engine Oil Filter Base - Install
CX35 On-Highway Transmission Magnetic Screen (Transmission) - Clean
3512C and 3516C Engines Diagnostic Code List
3512C and 3516C Engines Event Code List
CX38-P892 Well Servicing Transmission Electrical Storm Injury Prevention
TH31-E61 and TH35-E81 Petroleum Transmissions Specifications
C11 and C13 Engines Flywheel
C11 and C13 Engines Flywheel
2005/11/21 Improved Joint Assemblies and Seals are Used for the Fuel Lines Group {1274}
345C Excavator and 345C MHPU Mobile Hydraulic Power Unit Machine Systems Travel Motor - Assemble
C15 Industrial Engine Sensors and Electrical Connectors
C27 and C32 Generator Set Engines Gear Group (Rear) - Install