AD55 Underground Articulated Truck Power Train Caterpillar


Axle and Final Drive System

Usage:

AD55 ANW


Illustration 1g01082214
Basic diagram for the axle and final drive system

Caterpillar Information System:

AD55 Underground Articulated Truck Gear Pump (Hoist, Steering, Brake, and Pilot) - Remove
D10T Track-Type Tractor Machine Systems Refrigerant Accumulator - Remove and Install
AccuGrade Laser System Determining Detected Faults (Display)
AccuGrade Laser System Determining Detected Faults (Electronic Service Tool)
2012/11/02 Improved Mounting Brackets for the Angle Cylinders Are Now Used {6060, 6063}
834H Wheel Dozer and 836H Landfill Compactor Electrohydraulic System Bulldozer Pin
988H Wheel Loader Power Train Reduced Rimpull Pressure - Test
AccuGrade Laser System Module - Flash Program
2004/06/28 A Larger Damper is Now Used {1205}
988H Wheel Loader Power Train Torque Converter Lockup Clutch Pressure - Test
834H Wheel Dozer and 836H Landfill Compactor Electrohydraulic System Tilt and Tip Cylinder - Right Side
988H Wheel Loader Power Train Torque Converter Impeller Clutch Pressure - Test
AD55 Underground Articulated Truck Power Train Visual Inspection (Axle and Final Drive)
AD55 Underground Articulated Truck Power Train Gear Pump (Transmission Charging and Torque Converter Scavenge) - Test and Adjust
988H Wheel Loader Power Train Calibration
988H Wheel Loader Power Train Fill Pressure for the Impeller Clutch of the Torque Converter (Operator Monitor) - Calibrate
988H Wheel Loader Power Train Engagement Pressure for the Lockup Clutch of the Torque Converter (Operator Monitor) - Calibrate
D9T Track-Type Tractor Machine Systems Ripper Tilt Cylinder - Remove and Install
D9T Track-Type Tractor Engine Supplement Engine Side Guards - Remove and Install
824H Wheel Dozer, 825H Soil Compactor and 826H Landfill Compactor Machine Systems Front Frame to Rear Frame - Connect
988H Wheel Loader Steering System Steering Pilot System
930G Wheel Loader Braking and Hydraulic Fan System General Information (Braking)
C13, C15, and C18 Tier 4 Final Engines Engine Oil Pan
994D Wheel Loader Maintenance Interval Schedule
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.