Bulldozer Pin
Show/hide table
 | |
| 图 1 | g01345771 |
(1) 十二只螺栓的扭矩 ... 900 ± 100 N·m (660 ± 75 lb ft)
Show/hide table
 | |
| 图 2 | g01375901 |
典型实例 | |
(2) 两个螺栓的扭矩 ... 530 ± 70 N·m (390 ± 50 lb ft)
Caterpillar Information System:
988H Wheel Loader Power Train Reduced Rimpull Pressure - Test
AccuGrade Laser System Module - Flash Program
2004/06/28 A Larger Damper is Now Used {1205}
988H Wheel Loader Power Train Torque Converter Lockup Clutch Pressure - Test
834H Wheel Dozer and 836H Landfill Compactor Electrohydraulic System Tilt and Tip Cylinder - Right Side
988H Wheel Loader Power Train Torque Converter Impeller Clutch Pressure - Test
854G and 854K Wheel Dozers and 992G, 992K and 994F Wheel Loaders VIMSTM MID 049 - CID 0826 - FMI 04
854G and 854K Wheel Dozers and 992G, 992K and 994F Wheel Loaders VIMSTM MID 049 - CID 0826 - FMI 03
988H Wheel Loader Power Train Reduced Rimpull Setting (Electronic Technician) - Adjust
AccuGrade Laser System MID 114 - CID 0248 - FMI 09
988H Wheel Loader Power Train Fill Time for the Transmission Clutch (Operator Monitor) - Calibrate
988H Wheel Loader Power Train Engagement Pressure for the Transmission Clutch (Operator Monitor) - Calibrate
2012/11/02 Improved Mounting Brackets for the Angle Cylinders Are Now Used {6060, 6063}
AccuGrade Laser System Determining Detected Faults (Electronic Service Tool)
AccuGrade Laser System Determining Detected Faults (Display)
D10T Track-Type Tractor Machine Systems Refrigerant Accumulator - Remove and Install
AD55 Underground Articulated Truck Gear Pump (Hoist, Steering, Brake, and Pilot) - Remove
AD55 Underground Articulated Truck Power Train Axle and Final Drive System
AD55 Underground Articulated Truck Power Train Visual Inspection (Axle and Final Drive)
AD55 Underground Articulated Truck Power Train Gear Pump (Transmission Charging and Torque Converter Scavenge) - Test and Adjust
988H Wheel Loader Power Train Calibration
988H Wheel Loader Power Train Fill Pressure for the Impeller Clutch of the Torque Converter (Operator Monitor) - Calibrate
988H Wheel Loader Power Train Engagement Pressure for the Lockup Clutch of the Torque Converter (Operator Monitor) - Calibrate
D9T Track-Type Tractor Machine Systems Ripper Tilt Cylinder - Remove and Install