2004/06/28 Caterpillar


A Larger Damper is Now Used {1205}

Usage:

D11R 7PZ
Track-Type Tractor:
D11R (S/N: AAF225-UP; 9TR1-UP; 9XR1-UP; 7PZ868-UP)
Service Magazine SEPD0740, June 2004, "A Larger Damper is Now Used". Disregard the article. Refer to the following information.

Description of Change: The damper group has been replaced. The new damper has enhanced properties for vibration dampening. The new damper is equipped with a sampling port that will allow testing of the internal fluid at engine overhaul to determine the condition of the damper. Conversion from the old damper to the new damper is recommended at an engine overhaul.

Adaptable To: The 240-7762 Damper Gp has replaced the 8N-7182 Damper Gp. The 240-7762 Damper Gp is not serviceable. Refer to Table 1 for contents of the 240-7762 Damper Gp .

Note: The existing bolts and washers from the 8N-7182 Damper Gp are reusable.

Table 1
240-7762 Damper Gp    
Quantity     Part Number     Description    
1     1N-3482     Adapter    
6     8S-4757     Bolts    
1     244-4508     Damper    
6     5P-8250     Washers    
The 240-7762 Damper Gp is adaptable to first production of the D11R. This change requires the parts that are listed in the Table 2. Use the group numbers that are listed in Tables 2and 3 as an assembly aid.

Note: On S/N:AAF and S/N:; 7PZ machines, the four mounting bolts for the aftercooler water pump may need to be loosened slightly in order to install the damper. By loosening the bolts, the pump flange will be able to rotate. This ensures that the 246-5591 Tube can be correctly aligned.




Illustration 1g01082200

(1) 1N-3482 Adapter

(2) 244-4508 Damper

(3) 8S-4757 Bolts

(3) Bolt torque ... 1125 ± 100 N·m (830 ± 75 lb ft)

Table 2
Required Parts for the Retrofitting of the Damper    
Serial Numbers     Part Number     Description     Group Number     Description of the Group    
S/N:AAF, S/N:; 7PZ with an engine arrangement of 155-5556.     240-7766     Tube     156-9840     Water Lines Gp    
240-7768 Adapter    
244-4508 Damper     240-7762     Damper Gp    
1N-3482 Adapter    
246-5591 Tube     156-9815     Water Lines Gp    

Table 3
Required Parts for the Retrofitting of the Damper    
Serial Numbers     Part Number     Description     Group Number     Description of the Group    
S/N:9TR, S/N:; 9XR with an engine arrangement of 100-8111.     240-7766     Tube     156-9840     Water Lines Gp    
240-7768 Adapter    
244-4508 Damper     240-7762     Damper Gp    
1N-3482 Adapter    
Refer to Table 4 for the effective serial numbers.

Table 4
Effective Serial Numbers    
S/N:7PZ00868    
S/N:AAF00225    

Caterpillar Information System:

988H Wheel Loader Power Train Torque Converter Lockup Clutch Pressure - Test
834H Wheel Dozer and 836H Landfill Compactor Electrohydraulic System Tilt and Tip Cylinder - Right Side
988H Wheel Loader Power Train Torque Converter Impeller Clutch Pressure - Test
854G and 854K Wheel Dozers and 992G, 992K and 994F Wheel Loaders VIMSTM MID 049 - CID 0826 - FMI 04
854G and 854K Wheel Dozers and 992G, 992K and 994F Wheel Loaders VIMSTM MID 049 - CID 0826 - FMI 03
988H Wheel Loader Power Train Reduced Rimpull Setting (Electronic Technician) - Adjust
AccuGrade Laser System MID 114 - CID 0248 - FMI 09
988H Wheel Loader Power Train Fill Time for the Transmission Clutch (Operator Monitor) - Calibrate
988H Wheel Loader Power Train Engagement Pressure for the Transmission Clutch (Operator Monitor) - Calibrate
2004/07/05 Improved Analysis of Non-Warrantable Failures for Reman Vane Cartridges {5055}
631G and 637G Wheel Tractor-Scrapers Machine Systems Main Control Valve - Install
2004/07/01 Engines Are Now Built with Semi-Crowned Lifter Rollers {1209}
AccuGrade Laser System Module - Flash Program
988H Wheel Loader Power Train Reduced Rimpull Pressure - Test
834H Wheel Dozer and 836H Landfill Compactor Electrohydraulic System Bulldozer Pin
2012/11/02 Improved Mounting Brackets for the Angle Cylinders Are Now Used {6060, 6063}
AccuGrade Laser System Determining Detected Faults (Electronic Service Tool)
AccuGrade Laser System Determining Detected Faults (Display)
D10T Track-Type Tractor Machine Systems Refrigerant Accumulator - Remove and Install
AD55 Underground Articulated Truck Gear Pump (Hoist, Steering, Brake, and Pilot) - Remove
AD55 Underground Articulated Truck Power Train Axle and Final Drive System
AD55 Underground Articulated Truck Power Train Visual Inspection (Axle and Final Drive)
AD55 Underground Articulated Truck Power Train Gear Pump (Transmission Charging and Torque Converter Scavenge) - Test and Adjust
988H Wheel Loader Power Train Calibration
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.