Control Manifold - Remove
拆卸步骤
注: 清洁度是一项重要的因素。 拆卸步骤开始之前，应彻底清洁部件外部。 这有助于防止尘土进入内部结构。
Show/hide table
| 注意 |
|---|
在检验、保养、测试、调整及维修发动机时，请小心确保盛接流出的液体。 在打开或拆解任何储有液体的部件之前，要准备好合适的容器收集液体。 有关适合收集和盛接卡特彼勒产品上的液体的工具和供应品，请参阅专门出版物, NENG2500, "卡特彼勒代理商工具目录"。 按照本地法规和条例处置所有液体。 |
- 断开线束组件 (1) 。 拆下螺栓 (3) 、控制歧管 (2) 和 O 形密封圈。
Show/hide table
 | |
| 图 1 | g01569273 |
Caterpillar Information System:
C7 Engine for AP-1000D, AP-1055D, BG-2455D, and BG-260D Asphalt Pavers Engine Will Not Crank
3412 Generator Set Engines Fuel Injection Pump
3412 Generator Set Engines Fuel Injection Pump
3412 Generator Set Engines Fuel Injection Pump
3412 Generator Set Engines Fuel Injection Pump
C32 Petroleum Engines Pistons and Connecting Rods - Assemble
C32 Petroleum Engines Engine Oil Pump - Assemble
C32 Marine Engines Engine Oil Pump - Disassemble
C32 Marine Engines Engine Oil Pump - Install
C32 Marine Engines Engine Oil Pump - Remove
C4.4 and C6.6 Industrial Engines and Engines for Caterpillar Built Machines Idle Validation Switch Circuit - Test
C4.4 and C6.6 Industrial Engines and Engines for Caterpillar Built Machines E2143 Low Engine Coolant Level
C15 Petroleum Generator Set Engines Fuel Filter Base
TH48-E80 Oil/Gas Transmission Control Manifold - Install
TH48-E80 Oil/Gas Transmission Control Manifold - Disassemble
TH48-E80 Oil/Gas Transmission Control Manifold - Assemble
C15 Petroleum Generator Set Engines Turbocharger
TH48-E80 Oil/Gas Transmission Speed Sensor (Transmission) - Remove
TH48-E80 Oil/Gas Transmission Speed Sensor (Transmission) - Install
C-12 Generator Set Engine Sensors and Electrical Connectors
TH48-E80 Oil/Gas Transmission Transfer Gears - Remove - Idler
TH48-E80 Oil/Gas Transmission Transfer Gears - Install - Idler
345C Excavator and 345C MHPU Mobile Hydraulic Power Unit Machine Systems Counterbalance Valve (Travel) - Install
TH48-E80 Oil/Gas Transmission Transfer Gears - Disassemble - Idler