Engine Oil Pump - Disassemble
Show/hide table
所需工具 | |||
---|---|---|---|
工具 | 零件号 | 零件描述 | 数量 |
A | 1P-0510 | 冲头总成 | 1 |
B | 1P-2320 | 拉拔器组件 | 1 |
开始:
- 拆下发动机机油泵。 请参阅拆解和组装, "发动机机油泵 - 拆卸"。
Show/hide table
注意 |
---|
保持所有零件清洁无杂质。 杂质会造成快速磨损並縮短部件使用寿命。 |
- 卸下螺栓 (1) 和垫圈 (2)。
- 使用工具 (A) 和工具 (B) 将主动齿轮 (3) 从泵体 (4) 上拆下。 从泵轴上拆下键。
Show/hide table
图 2 g01195938 Show/hide table被弹簧力爆出的零件击中,会招致人员伤害。
确保穿上所有必要的保护装备。
遵照建议的程序,并使用所有建议的工具以释放弹簧力。
- 拆下螺栓 (14) 并从泵体 (4) 上分离盖 (13)。
- 使用工具 (A) 和适当的压具,将轴承 (12) 从盖 (13) 上拆下。
- 拆下轴组件 (11)。
- 拆下螺栓 (9) 和护圈 (8)。
- 拆下弹簧 (7)、柱塞环 (6) 和柱塞 (5)。
- 使用工具 (A) 和适当的压具将轴承 (10) 从泵体 (4) 上拆下。
Show/hide table
图 1 | g01195925 |
Caterpillar Information System:
C32 Marine Engines Engine Oil Pump - Install
C32 Marine Engines Engine Oil Pump - Remove
C4.4 and C6.6 Industrial Engines and Engines for Caterpillar Built Machines Idle Validation Switch Circuit - Test
C4.4 and C6.6 Industrial Engines and Engines for Caterpillar Built Machines E2143 Low Engine Coolant Level
C4.4 and C6.6 Industrial Engines and Engines for Caterpillar Built Machines E172 High Air Filter Restriction
C4.4 and C6.6 Industrial Engines and Engines for Caterpillar Built Machines E232 High Fuel/Water Separator Water Level
TH48-E80 Oil/Gas Transmission Pump Drive - Install
TH48-E80 Oil/Gas Transmission Pump Drive - Assemble
TH48-E80 Oil/Gas Transmission Pump Drive - Disassemble
TH48-E80 Oil/Gas Transmission Pump Drive - Remove
C27 and C32 Generator Set Engines Water Pump - Assemble
C7 Urban Transit Bus Engines Cooling System Coolant Sample (Level 1) - Obtain
C32 Petroleum Engines Engine Oil Pump - Assemble
C32 Petroleum Engines Pistons and Connecting Rods - Assemble
3412 Generator Set Engines Fuel Injection Pump
3412 Generator Set Engines Fuel Injection Pump
3412 Generator Set Engines Fuel Injection Pump
3412 Generator Set Engines Fuel Injection Pump
C7 Engine for AP-1000D, AP-1055D, BG-2455D, and BG-260D Asphalt Pavers Engine Will Not Crank
TH48-E80 Oil/Gas Transmission Control Manifold - Remove
C15 Petroleum Generator Set Engines Fuel Filter Base
TH48-E80 Oil/Gas Transmission Control Manifold - Install
TH48-E80 Oil/Gas Transmission Control Manifold - Disassemble
TH48-E80 Oil/Gas Transmission Control Manifold - Assemble