Fuel Injection Pump
Show/hide table
 | |
| Illustration 1 | g03137345 |
Show/hide table
| Specification for 108-6633 Fuel Injection Pump Gp | |||
| Item | Qty | Part | Specification Description |
| 1 | 8 | 7E-9907 Spacer | Thickness of one spacer is 6.761 ± 0.005 mm (0.2662 ± 0.0002 inch). |
Show/hide table
 | |
| Illustration 2 | g03137346 |
Show/hide table
| Specification for 108-6633 Fuel Injection Pump Gp | |||
| Item | Qty | Part | Specification Description |
| 2 | 1 | 8N-5993 Flow Check Spring | Length under test force is 11.50 mm (0.453 inch). Test force is 151 ± 8 N (34 ± 2 lb). Free length after test is 15.81 mm (0.622 inch). |
| 3 | 1 | 4P-7124 Spring | Length under test force is 5.07 mm (0.200 inch). Test force is 8.24 ± 0.82 N (1.85 ± 0.18 lb). Free length after test is 5.6 mm (0.22 inch). |
| 4 | 1 | 118-0540 Spring | Length under test force is 48.87 mm (1.924 inch). Test force is 210 ± 10 N (47 ± 2 lb). Free length after test is 53.87 mm (2.121 inch). |
| A | 1 | 7E-6009 Plunger | Length of fuel injection pump plunger is 77.423 ± 0.013 mm (3.0481 ± 0.0005 inch). |
Caterpillar Information System:
C32 Petroleum Engines Pistons and Connecting Rods - Assemble
C32 Petroleum Engines Engine Oil Pump - Assemble
C32 Marine Engines Engine Oil Pump - Disassemble
C32 Marine Engines Engine Oil Pump - Install
C32 Marine Engines Engine Oil Pump - Remove
C4.4 and C6.6 Industrial Engines and Engines for Caterpillar Built Machines Idle Validation Switch Circuit - Test
C4.4 and C6.6 Industrial Engines and Engines for Caterpillar Built Machines E2143 Low Engine Coolant Level
C4.4 and C6.6 Industrial Engines and Engines for Caterpillar Built Machines E172 High Air Filter Restriction
C4.4 and C6.6 Industrial Engines and Engines for Caterpillar Built Machines E232 High Fuel/Water Separator Water Level
TH48-E80 Oil/Gas Transmission Pump Drive - Install
TH48-E80 Oil/Gas Transmission Pump Drive - Assemble
TH48-E80 Oil/Gas Transmission Pump Drive - Disassemble
3412 Generator Set Engines Fuel Injection Pump
3412 Generator Set Engines Fuel Injection Pump
3412 Generator Set Engines Fuel Injection Pump
C7 Engine for AP-1000D, AP-1055D, BG-2455D, and BG-260D Asphalt Pavers Engine Will Not Crank
TH48-E80 Oil/Gas Transmission Control Manifold - Remove
C15 Petroleum Generator Set Engines Fuel Filter Base
TH48-E80 Oil/Gas Transmission Control Manifold - Install
TH48-E80 Oil/Gas Transmission Control Manifold - Disassemble
TH48-E80 Oil/Gas Transmission Control Manifold - Assemble
C15 Petroleum Generator Set Engines Turbocharger
TH48-E80 Oil/Gas Transmission Speed Sensor (Transmission) - Remove
TH48-E80 Oil/Gas Transmission Speed Sensor (Transmission) - Install