2003/08/04 Caterpillar


Correction to Specifications, "Engine Support (Rear)" {1152}

Usage:

AD30 CXR
Underground Articulated Truck:
AD30 (S/N: CXR1-UP)
Specifications, RENR6907, "AD30 Underground Articulated Truck 3406E Engine Supplement", "Engine Support (Rear)". This module is part of Service Manual, RENR4778. The torque value for two bolts and nuts (1) is incorrect. The correct information follows.


Illustration 1g00916495

(1) Torque for the two bolts and nuts (each side) ... 800 ± 100 N·m (590 ± 75 lb ft)

(2) Torque for the four bolts (each side) ... 240 ± 40 N·m (175 ± 30 lb ft)

Caterpillar Information System:

AD30 Underground Articulated Truck Machine Electrical System Hoist Control - Ejector Body
AD55 Underground Articulated Truck Screen (Torque Converter) - Clean
AD55 Underground Articulated Truck Tire Inflation - Check
2003/08/04 SOS Sampling Valve For The Transmission Is Used {3080, 7542}
615C Series II Wheel Tractor-Scraper Hydraulic System Accumulator (Axle Suspension)
D3G, D4G and D5G Track-Type Tractors Fuses - Replace
994D Wheel Loader Engine Starting with Auxiliary Start Receptacle
Machine Security System (MSS) Integrated Configuration
2003/10/01 An Improved Alternator Belt is Used {1357}
2003/09/15 An Improved Alternator Belt is Used {1357}
2003/07/28 Correction to Special Instruction , "Dimensions for Articulated Hitches" {7057, 7064}
D3G, D4G and D5G Track-Type Tractors Monitoring System
G3406 Engines Water Temperature Regulator
D3G, D4G and D5G Track-Type Tractors Engine and Machine Warm-Up
Machine Security System (MSS) Integrated Glossary of Terms
D8T Track-Type Tractor Operator Controls
D3G, D4G and D5G Track-Type Tractors Brakes, Indicators and Gauges - Test
Rework of the Stabilizer Link and Tilt Cylinder Lines{5057, 5104} Rework of the Stabilizer Link and Tilt Cylinder Lines{5057, 5104}
3126B Machine Engines Throttle Switch Circuit - Test
615C Series II Wheel Tractor-Scraper Hydraulic System Vane Pump (Elevator)
D3G, D4G and D5G Track-Type Tractors Electrohydraulic Calibration
D3G, D4G and D5G Track-Type Tractors Electrohydraulic Position Sensor (Steering) of Joystick Control - Calibrate
D3G, D4G and D5G Track-Type Tractors Electrohydraulic Electrical Component and Connector Locations
D3G, D4G and D5G Track-Type Tractors Electrohydraulic Fuse
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.