2003/07/28 Caterpillar

Correction to Special Instruction , "Dimensions for Articulated Hitches" {7057, 7064}

Usage:

992G 7HR

Wheel Loader: 992G (S/N: 7HR1-UP; ADZ1-UP)

Special Instructions, SEHS8642, "Dimensions for Articulated Hitches"

A portion of the existing special instruction is incorrect. Replace the graphic and the information for "The Dimensions for the Hitches" on the 992G Wheel Loader with the following information. The remainder of the information is correct.

Show/hide table




Illustration 1	g01012987

Show/hide table

Table 1
The Dimensions for the Hitches
Location	Model
Location	992G
S1	352.0 ± 1.0 mm (13.8582 ± 0.0394 inch)
S2	99.0 ± 0.8 mm (3.8976 ± 0.0315 inch)
S3	220.0 ± 2.0 mm (8.66 ± .08 inch)
S4	185.0 ± 8.0 mm (7.2835 ± 0.3150 inch)
S5	820.0 ± 9.0 mm (32.28 ± .35 inch)
S6	90.0 ± 1.0 mm (3.5433 ± 0.0394 inch)
T6	154.00 ± 0.25 mm (6.063 ± .010 inch)
T7	120.00 ± 0.25 mm (4.724 ± .010 inch)
T8	99.0 ± 0.5 mm (3.90 ± .02 inch)
S9	70.0 ± 3.0 mm (2.76 ± .12 inch)
D1	184.25 ± 0.05 mm (7.254 ± .002 inch)
D2	152.48 ± 0.05 mm (6.003 ± .002 inch)
D3	106.00 ± 0.05 mm (4.1732 ± 0.0020 inch)
D4	133.40 ± 0.05 mm (5.252 ± .002 inch)
D5	133.40 ± 0.05 mm (5.252 ± .002 inch)
D6	200.00 ± 0.05 mm (7.874 ± .002 inch)
D7	270.00 ± 0.05 mm (10.630 ± .002 inch)
D8	254.03 ± 0.05 mm (10.001 ± .002 inch)
D9	196.825 ± 0.038 mm (7.7490 ± .0015 inch)
D10	93.00 ± 0.05 mm (3.661 ± .002 inch)
D11	106.07 ± 0.05 mm (4.1760 ± 0.0020 inch)
D12	229.9 ± 0.05 mm (9.0512 ± 0.0020 inch) ⁽¹⁾