Hydraulic Lockout Control - Install
Show/hide table
所需工具 | |||
---|---|---|---|
工具 | 零件号 | 零件描述 | 数量 |
A | - | Loctite 243 | - |
- 安装液压闭锁控制装置 (3)、螺栓 (4) 和螺栓 (5)。
- 将工具 (A) 涂覆到螺钉 (6) 的螺纹上。 定位开关组件 (7),然后安装螺钉 (6)。 拧紧螺钉 (6) 至扭矩为
0.7 ± 0.1 N·m (6.2 ± 0.9 lb in) 。 连接电缆带 (8)。Show/hide table图 2 g01187398 - 安装面板 (1) 和螺钉 (2)。
Show/hide table
图 1 | g01278781 |
Caterpillar Information System:
324D, 325D, 326D and 329D Excavators and 329D MHPU Mobile Hydraulic Power Unit Machine Systems Hydraulic Lockout Control - Remove
C32 Marine and Auxiliary Marine Engines Marine Transmission Oil Cooler - Remove and Install
3500 Generator Sets Manual Stop Procedure
TH48-E80 Oil/Gas Transmission Transmission Planetary - Disassemble
TH48-E80 Oil/Gas Transmission Transmission Planetary - Assemble
C32 Petroleum Engines Crankshaft Rear Seal - Install
C32 Petroleum Engines Crankshaft Rear Seal - Remove
C27 and C32 Engines for Caterpillar Built Machines E539 High Intake Manifold Air Temperature
C18 Generator Sets Walk-Around Inspection
TH48-E80 Petroleum Transmission Power Train Electronic Control System MID 027 - CID 0702 - FMI 02
C32 Petroleum Engines Water Temperature Regulator - Remove and Install
Guidelines for Installation and Maintenance of Sea Water Heat Exchangers, Strainers, and Fuel Coolers{1379, 3319} Guidelines for Installation and Maintenance of Sea Water Heat Exchangers, Strainers, and Fuel Coolers{1379, 3319}
324D, 325D, 326D and 329D Excavators and 329D MHPU Mobile Hydraulic Power Unit Machine Systems Hydraulic Lockout Control - Disassemble
324D, 325D, 326D and 329D Excavators and 329D MHPU Mobile Hydraulic Power Unit Machine Systems Hydraulic Lockout Control - Assemble
303.5E2 CR, 304E2 CR, 305E2 CR and 305.5E2 CR Mini Hydraulic Excavators Machine System Visual Inspection
C32 Marine and Auxiliary Marine Engines Flywheel Housing - Remove and Install
3508B, 3512B, 3516B, 3512C and and 3516C Auxiliary Engines, Generator Set Engines, and Generator Sets Generator Installation
C18 Generator Sets Cooling System Supplemental Coolant Additive (SCA) - Test/Add
C4.4 and C6.6 Engines for Caterpillar Built Machines Wastegate Solenoid - Test
C6.6 Industrial Engine Turbocharger
C4.4 and C6.6 Industrial Engines and Engines for Caterpillar Built Machines CID 1785 FMI 03
C4.4 and C6.6 Industrial Engines and Engines for Caterpillar Built Machines CID 1785 FMI 04
C4.4 and C6.6 Industrial Engines and Engines for Caterpillar Built Machines PTO Switch Circuit - Test
C4.4 and C6.6 Industrial Engines and Engines for Caterpillar Built Machines CID 1797 FMI 03