C7 Engines for Caterpillar Built Machines Caterpillar


Piston Cooling Jets - Remove and Install

Usage:

584HD 109

拆卸步骤

开始:

  1. 拆卸发动机机油泵。 请参阅拆解和组装, "发动机机油泵 - 拆卸"。


注意

保持所有零件清洁无杂质。

杂质会造成快速磨损和缩短部件寿命。





    图 1g00987444

  1. 从每个气缸拆卸螺栓 (2) 和活塞冷却喷嘴 (1) 。

安装步骤


注意

保持所有零件清洁无杂质。

杂质会造成快速磨损和缩短部件寿命。





    图 2g00987444

  1. 将活塞冷却喷嘴 (1) 放置在缸体中。 安装螺栓 (2) 。 将螺栓 (2) 上紧到 28 ± 7 N·m (21 ± 5 lb ft) 的扭矩。

End By: 安装发动机机油泵。 请参阅 拆解和组装, "发动机机油泵 - 安装"。

Caterpillar Information System:

C7 Engines for Caterpillar Built Machines Rocker Shaft - Assemble
2003/04/07 An Improved Cooling Fan Clutch Is Now Used For D9R and D10R {1359}
C11 and C13 Engines for Caterpillar Built Machines Variable Valve Actuators - Inspect/Adjust
C7 Engines for Caterpillar Built Machines Rocker Shaft - Disassemble
IT62G Integrated Toolcarrier and 950G and 962G Wheel Loaders Bucket Upper Pivot Bearings - Lubricate
953C Track-Type Loader Coolant Sample (Level 2) - Obtain
953C Track-Type Loader Coolant Sample (Level 1) - Obtain
C7 Engines for Caterpillar Built Machines Water Temperature Regulator - Remove and Install
D5N Track-Type Tractor Power Train Track Roller - Install
D5N Track-Type Tractor Power Train Track Roller - Remove
D6N Track-Type Tractor Power Train Recoil Spring - Install
D6N Track-Type Tractor Power Train Recoil Spring - Remove
IT62G Integrated Toolcarrier and 950G and 962G Wheel Loaders Bucket Wear Plates - Inspect/Replace
651E and 657E Wheel Tractor-Scrapers Hydraulic System Relief Valve (Push-Pull) - Test and Adjust
938G Series II Wheel Loader and IT38G Series II Integrated Toolcarrier Machine Systems Pilot Operated Hydraulic Control - Disassemble
938G Series II Wheel Loader and IT38G Series II Integrated Toolcarrier Machine Systems Pilot Operated Hydraulic Control - Assemble
611 and 615C Series II Wheel Tractor-Scrapers Steering System General Information
611 and 615C Series II Wheel Tractor-Scrapers Steering System Piston Pump (Secondary Steering)
611 and 615C Series II Wheel Tractor-Scrapers Steering System Steering System Troubleshooting
615C Series II Wheel Tractor-Scraper Air System and Brakes Differential Lock Control
615C Series II Wheel Tractor-Scraper Air System and Brakes Pressure Protection Valve (Brake Air System)
2003/10/27 Special Instruction, REHS1522 , "Instruction Book for the Lincoln Quicklub® Automatic Lubrication System for the 988G Model Wheel Loaders" is Available {7540}
C7 Engines for Caterpillar Built Machines Camshaft Gear - Remove and Install
980G Series II Wheel Loader Electrohydraulic System Hydraulic Fan Speed - Test and Adjust
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.